DU-HA 70821 Manual

STEP 1 - Attach Handle to Lid

Place Handle (4) over holes in Lid Top. Insert two Bolts
#10 x 1.5" (7) through Flat Washer - #10 (9), Handle (4),
and All-Terrain Lid. Secure with Flat Sealing Washer (has a
rubber backing) - #10 (10) and Lock Nut #10 (11) Use 1/8"
Hex Key Wrench.
Note: Handle may already be installed.

STEP 2 - Attach Rubber T-Handles

Place Rubber T-Handle (5) over inserts in Base. Insert two
Bolts #10-32 x 1.0" (8) through T-Handle (5) and use 1/8"
Hex Key Wrench to tighten into the inserts, on each end,
T-Handle should point outward when in the up position.
Next install the Rubber T-Handle Keeper (6) on the lid,
make sure the alignment knob on the back of the T-Handle
Keeper lines up with the recess in the lid and secure in
place with one Bolt #10-32 x 1.0" (8) by inserting through
the T-Handle Keeper (6) and thread into the insert in the lid,
on each end.
All-Terrain
70821 - DU-HA All-Terrain for Bobcat
and Ranger UTV - Full Size Box
NOTE: Works on full-size box only.
Mid-Size box has 7 holes across the
front of the box and the Full-Size box has
9 holes across the front of the box.
7
9
4
Lid
6
5
8
11
10