Download Print this page

DU-HA DU-HOOKY Assembly Instructions

PART #70099

DU-HOOKY

Assembly Instructions

Remove Du-Hooky from packaging and layout on a table or bench.

Attach the end tube with the yellow tip to the bent tube by depressing

the push button spring on the end tube and sliding it into the end of the

bent tube and line up with the hole in the bent tube until the push spring

button snaps into place. The end tube can be positioned in either direction

so the yellow tip can be positioned in either direction.

Next attach the bent tube to the re-tractable tube by depressing the push

button spring on the re-tractable tube and sliding the bent tube onto the

re-tractable tube, line up with hole in tube until the push spring button

snaps into place. The bent tube can also be positioned in either

direction, this is helpful when retrieving items and the re-tractable tube

keeps loosening. You can turn the end tube the opposite direction so it

stays tightened.

phone: 1.866.306.DUHA (3842) // fax: 1.218.998.4013 // 306 Saint Andrews Street South, Fergus Falls, MN 56537

DU-HA, Inc. // www.du-ha.com

Table of Contents

Need help?

Do you have a question about the DU-HOOKY and is the answer not in the manual?

Page 1 DU-HOOKY Assembly Instructions Remove Du-Hooky from packaging and layout on a table or bench. Attach the end tube with the yellow tip to the bent tube by depressing the push button spring on the end tube and sliding it into the end of the bent tube and line up with the hole in the bent tube until the push spring button snaps into place.
Page 2 Note: You can also attach the mounting clip (Item B) to a wall in your shop or garage to keep the DU-HOOKY (Item A) within reach at all times. You can also use the Du- Hooky in SUV’s and Van’s or anywhere else you have hard to reach item’s.

70099