Advertisement
Stylus Height Adjustment
1.
Put a test record (YFSC-16) or a record on the
mat.
2.
Depress
the
lifter knob
to make a lifter-up
mode
and move the arm on most outer-groove
of a record. Confirm that the stylus height from
a record is within specification.
If not, turn the
adjustment screw.
3.
Move the arm on most inner-groove of a record
and confirm that the stylus height from a re-
cord is within specification.
If not, turn the ad-
justment screw and repeat steps 2 and 3.
Specification:
4 — 12mm (3/16 — 1/2 inch)
4—12mm
"HG
TITTTTIT
ITT IT
record
oo
__
adjustment screw
PS-LX230/LX230€/LX231
Automatic Return Position Adjustment
1.
Puta test record (YFSC-16) on the mat.
2.
Set
the
SPEED
switch
to 33 and move
the
tonearm on a return check groove.
3.
Turn
the adjustment
screw
so that the tone-
arm starts to return at count of 4 — 10.
adjustment screw
count increase
count decrease
Advertisement
