Table of Contents
Advertisement
Clear RTC RAM (2-pin CLRTC)
This header allows you to clear the CMOS RTC RAM data of
the system setup information such as date, time, and system
passwords.
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2.
Use a metal object such as a screwdriver to short the two
pins.
3.
Plug the power cord and turn ON the computer.
4.
Hold down the <Del> key during the boot process and enter
BIOS setup to re-enter data.
If the steps above do not help, remove the onboard battery and short the two pins again
to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
USB 2.0 connectors (10-1 pin USB78, USB1114)
Connect a USB module cable to any of these
connectors, then install the module to a slot opening at
the back of the system chassis. These USB connectors
comply with USB 2.0 specifications and supports up to
480Mbps connection speed.
TPM connector (14-1 pin TPM)
This connector supports a Trusted Platform Module (TPM)
system, which can securely store keys, digital certificates,
passwords, and data. A TPM system also helps enhance
network security, protects digital identities, and ensures
platform integrity.
Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial
port module cable to this connector, then install the module
to a slot opening at the back of the system chassis.
ASUS PRIME H370M-PLUS
CLRTC
PIN 1
USB78
USB1114
PIN 1
PIN 1
TPM
PIN 1
COM
PIN 1
1-5
Advertisement
Table of Contents
