Analogue: manual installation
This gives you the possibility to manually
install (tuning-in channel by channel) analogue
channels. Manual installation will not find nor
store any DVB-T (digital) channels.
Select Analogue: manual installation
1
and press the π key.
TV menu
Installation
Languages
Country
Time zone
Channels
Preferences
Connections
Decoder
.............
Info
Select System.
2
Select your country or part of the world
3
where you are now located.
Select Search and press the π key.
4
Select the red or green colour key to
5
proceed.
Tip
If you know the frequency, enter the 3 digits
of the frequency with the digit keys 0 to 9 (For
example, 049).
Press the p key to store the channel found
6
or to search for another channel.
Select Fine tune and press the π key.
7
Fine tuning can be useful when the
frequency has shifted a bit or when
interference of another frequency occurs.
Adjust the frequency with the o or œ key
in case of poor reception of the channel
found.
Channels
Autom. installation
Installation update
Digital: test recept..
Analogue: manual..
Rearrange
Select Store current channel if you want
8
to store the (fine tuned) frequency under
the current channel number.
Press the π key and confirm with the OK
key.
Select Store as new channel if you want
to store the (fine tuned) frequency under a
new channel number.
Press the π key and confirm with the OK
key.
Use the rearrange menu to rename or
9
reshuffle the channels. See next page.
Note
When on a frequency where a DVB signal is
broadcasted, the tuner will try to decode an
analogue TV channel, and hence will not show
video.