Table of Contents
Advertisement
Operation with TAPE
Basic Playback
Press TAPE1-2 (or TAPE) to select tape function.
1 1
("NO TAPE " appears in the display window.)
Open cassette TAPE1-2 by pushing to the
2 2
ZPUSH EJECT position.
Insert one or two cassettes with the tape side to
3 3
the bottom and then close the TAPE 1 (and/or 2)
door.
G
F
Press
(or
: OPTIONAL).
4 4
AUTO STOP DECK (TAPE 1/2)
After auto stop deck plays front side of cassette, the unit
stops automatically.
AUTO REVERSE DECK (TAPE 2)
You can select direction of the cassette you want by
pressing PLAY MODE.
Pressing
Display
After the cassette of TAPE 1 or 2
plays front or reverse (backward
-
play) side, stops automatically.
After the cassette of TAPE 1 or 2
Once
plays front and reverse side,
stops automatically.
After the cassette of TAPE 1 or 2
Twice
plays six times repeatedly front and
reverse side, stops automatically.
Recording
Basic Setting
Select a function you want to record except tape
1 1
function.
Open the cassette deck TAPE 2 and insert a
2 2
blank cassette into the cassette compartment.
Set the recording direction
Press PLAY MODE repeatedly to set the recording
direction.
Recording from Radio, CD or Auxiliary source
Press zREC/PAUSE[] on the front panel or z/[]
1 1
on the remote control.
"REC" flashes and holds the cassette in pause
mode.
G
F
Press
(or
).
2 2
The recording begins.
To pause the recording
Press z/[] or zREC/PAUSE[].
To Stop the recording
Press STOP(x).
24
To Stop Play
Press STOP (x) on the front panel or TAPE
STOP(x) on the remote control during playback.
To Play Rewind or Fast Forward
After press b b b b /B B B B on the front panel or on the
remote control during playback, press
the tape position you want.
Dubbing
This function shows how to record from tape to tape.
Press TAPE1-2 (or TAPE).
1 1
• Cassette TAPE 1- Insert the playback tape to dub.
• Cassette TAPE 2- Insert a blank tape to copy on.
Press NOR-DUBB./HI-DUBB..
2 2
• NORMAL DUBBING - Normal speed copying
• HIGH DUBBING - Double speed copying
To stop recording, press STOP (x).
Function
CD to Tape Synchronized Recording
The CD synchro recording function dubs a complete CD
and programmed titles automatically into a cassette.
1 1
2 2
3 3
Notes
Notes
• If you wish to record from the desired track, select
the desired track with
CD synchro recording.
• You can not change any mode during recording.
Press DVD button on the remote
control.
Press CD SYNC. in stop mode.
"REC" flashes and "CD SYNC." displays in the
display window.
The synchronized recording is started
automatically after about 7 seconds.
FF
GG
before commencing
/
G
(or
F
) at
Advertisement
Table of Contents
