Set Up Your Tv; Settings Assistant; Picture And Sound - Philips 32PFL6606H User Manual

4 Set up your TV

Settings assistant

Use the settings assistant to guide you
through the picture and sound settings.
1. While you watch TV, press .
2. Select [Setup] > [Quick picture and
sound settings], then press OK.
3. Select [Start], then press OK.
4. Follow the onscreen instructions to
choose your preferred settings.

Picture and sound

More picture settings
1. Press .
2. Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select a setting to adjust:

[Smart picture]: Access predefined
smart picture settings.

[Reset]: Reset to default settings.

[Contrast]: Adjust the intensity of the
bright areas, keeping dark areas
unchanged.

[Brightness]: Adjust the intensity and
details of the dark areas.

[Colour]: Adjust colour saturation.

[Hue]: Compensate colour variations in
NTSC encoded transmissions.

[Sharpness]: Adjust sharpness in the
image.

[Noise reduction]: Filter and reduce
noise in the image.

[Tint]: Adjust the colour balance in the
image.

[Custom tint]: Customise tint setting.

[Pixel Plus HD] / [Pixel Precise HD]:
Access advanced settings, including [HD
Natural Motion], [100 Hz Clear LCD],
[Advanced sharpness], [Dynamic
contrast], [Dynamic backlight], [MPEG
artefact reduction], [Colour
enhancement], [Gamma].
EN 36

[PC mode]: Allow picture settings to be
changed when a PC is connected to the
TV through HDMI.
If enabled, you can select [Picture
format] > [Unscaled] which provides
maximum detail for display of PC
content.

[Light sensor]: Adjust settings
dynamically to match lighting conditions.

[Picture format]: Change the picture
format.

[Screen edges]: Change the picture size.

[Picture shift]: Adjust the position of
the picture. You cannot select this
setting if the selected picture format is
Auto zoom or Wide screen.
More sound settings
1. Press .
2. Select [Setup] > [TV settings] > [Sound],
then press OK.
3. Select a setting to adjust:

[Smart sound]: Access predefined
smart sound settings.

[Reset]: Reset to factory default
settings.

[Bass]: Adjust the bass level.

[Treble]: Adjust the treble level.

[Surround]: Enable spatial sound.

[Headphones volume]: Adjust
headphone volume.

[Auto volume leveling]: Automatically
reduce sudden volume changes, for
example when switching channels.

[Balance]: Adjust the balance of the left
and right speakers.