Casio PB-100 Instruction Manual page 8

SHIFT Shift Key (Symbolized by @ hereafter)
If this key is pressed, ihe shift ir) mode is selected ("|T]" 'S displayed) and the shift in
functions on the keyboard can be used. Do not confuse (J](red letter) with the regular
d ] .
(iooil Mode Key
" This is pressed in conjunction with the GD and (SI through (e) Keys to designate the
computer's condition or angular unit in advance.
®IZ] "EXT" is displayed and the extension mode is designated. Small English
letters and special symbols can be used. To release the extension mode
press @ GD again.
^(0) "RUN" is displayed and manual calculation and program execution can be
performed.
®(3D "WRT" is displayed and program write-in and checking/editing can be
performed.
"TR" is displayed and execution trace can be performed. (See page 43 for
d e t a i l s . )
When "TR" is displayed, it will be extinguished and the execution trace
function will be released.
"DEC" is displayed and the angular unit will be designated as "degree".
®|5| "RAD" is displayed and the angular unit will bedesignated as "radian".
"GRA" is displayed and the angular unit will be designated as "gradient".
"PRT" is displayed and if a printer is connected, printout can be
performed.
When "PRT" is displayed, it will be extinguished and the printout
function will be released.
Cursor Keys
Press to move the cursor left or riglTt. If pressed once, it moves one character. If you
keep pressing, it will continue to tnove automatically.
O N
All Clear Key
• Press to clear the entire display.
• If pressed during program execution, program execution will stop.
• When an error message is displayed, press to clear the error message display.
• When auto power off (automatic energy saving function, refer to page 13) is in
e operation and the display is off, press to turn power back on.
I N S
Delete/Insert Key
' • Deletes one character at the position of the blinking cursor.
• In the shift in mode, press to open up one character space for character insertion.
- 7 -