Return Your Settings To Default Values; Software; Checking Your Current Software Version; Preparing For The Software Upgrade - Philips 32PFL4907 User Manual

Setting status
You can check the status of network settings.
2
Use ▲▼ to select Setting status, then press OK.
• Network setting list will be displayed.
• MAC address of this unit will be displayed in the list.
Reset network settings
You can reset the status of network settings.
2
Use ▲▼ to select Reset network settings, then press OK.
3
Press OK to select Start now.
Return your settings to default values
When you return picture and sound settings to their default values the
channel installation settings are not affected.
1
Use ▲▼ to select Reset AV settings, then press OK.
2
Press OK to select Start now.

Software

Philips continuously tries to improve its products and we strongly
recommend that you upgrade the TV software when upgrades are available.
New software can be downloaded from our website at
www.philips.com/support using the model number of your TV to find
information.
1
Press MENU / E�IT and use ▲▼◄► to select Setup, then press
OK.
2
Use ▲▼ to select Software, then press OK.
Picture
Software information
Sound
Software update
Features
Automatically check for
Installation
Netflix deactivation
Software Netflix ESN
VUDU deactivation
MediaConnect code
Checking your current software version
1
Use ▲▼ to select Software information, then press OK.
• The version and a description of the current software is
displayed.
Picture Software information
Sound
Software update
Features
Automatically check for
Installation
Netflix deactivation
Software
Netflix ESN
VUDU deactivation
MediaConnect code
Preparing for the software upgrade
You require the following equipment :
– A PC with web browsing capability
– An archive utility that supports the ZIP-format
– (e.g. WinZip for Windows or StuffIt for Mac OS)
– An empty clean formatted USB Memory Stick
Note
• Only FAT / DOS-formatted portable memory is supported.
• Use only software upgrades that can be found on the Philips web site.
Warning
• When the software upgrade is running, don't press any buttons.
• Do not remove the USB Memory Stick during the software upgrade.
• If an error occurs during the upgrade, retry the procedure or for further assistance,
please contact Call Center.
43
English
Select
USB
Off
FNI-XXXX_XXX_X
Continued on next page.