Related Manuals for Dateq MusicAll MA-60D
Summary of Contents for Dateq MusicAll MA-60D
- Page 1 INSTALLATION AND OPERATION MANUAL MA-60D MA-120D Mixing amplifier with MP3/BT/FM/DAB+ Please read this manual carefully before operating. Damage caused by misuse is not covered by the warranty...
-
Page 2: Safety Warnings
SAFETY WARNINGS! Read and keep these instructions. Heed all warnings and follow all instructions. Do not use this device near water or in humid areas. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. - Page 3 INTRODUCTION Description This mixing amplifier with MP3 player, Bluetooth receiver and FM/DAB+ tuner, has a rated power output of 60W (MA-60D) or 120W (MA-120D). A perfect solution for schools, super markets, banks and hotels with BGM and speech use. It is an all in one solution with multiple sources, pre amplifier, mixer and power amplifier, all in one unit which makes it a cost-effective, reliable solution with high performance.
-
Page 4: Front Panel
FRONT PANEL MP3/Bluetooth/FM/DAB+ media player module Mic3/Line2 input attenuator Power indicator 10. Line3 input attenuator Protection indicator 11. Line4 input attenuator Clip indicator 12. Tel and Media player input attenuator Output level meter 13. Bass AC power switch 14. Treble Mic1 attenuator 15. -
Page 5: Rear Panel
REAR PANEL AC power socket 12. Tel input HOT (+), 600 Ohms, 1V AC fuse 13. MOH output COM (-) FM antenna 14. MOH output HOT (+) 24V DC battery input 15. Mic2/Line1 input Speaker output COM (-) 16. Mic3/Line2 input Speaker output 4 Ohm (+) 17. -
Page 6: Speaker Connections
power ratings. These tappings can be used to adjust the wattage (and output volume) of each speaker in the system to help achieve the ideal total power of the system for the amplifier. Speaker Terminal This terminal is offering 3 low voltage outputs 4Ω, 8Ω, 16Ω depending on your speaker combination. A 70V/100V commercial output is also available. -
Page 7: Media Player
If the VOX feature is enabled, audio playback through channels 2-5 will be reduced in volume automatically when speaking into MIC 1, use its attenuator to increase or decrease the mute level. In addition to channel and MASTER volume controls, there are BASS and TREBLE EQ controls to adjust the tone of the overall output. -
Page 8: Music On Hold
Alternatively, press and hold the Forward/Reverse seek buttons to auto search for available stations. Upon finding a station, the auto search will stop, giving the option to store this station. At this point, pressing the PLAY/PAUSE button will flash a “00” channel number in the display. Use the Previous/Next buttons to select an appropriate channel memory. -
Page 9: Specifications
SPECIFICATIONS Model MA-60D MA-120D Description Mixing amplifier with USB/SD//Bluetooth/FM/DAB+ radio Rated Power Output 120W Speaker Outputs 4, 8 or 16Ω / 70 or 100V Connector Mic1 input (balanced XLR with +48V phantom power) Mic/Line switchable 2-3 inputs unbalanced (6.3mm jack) Line1-2 inputs (RCA L,R) Line output (RCA L,R) Attenuation Microphone1-3, line1-2 and MP3/FM, bass/treble and master... -
Page 10: Troubleshooting
TROUBLESHOOTING Ensure IEC lead is in good condition and connected properly If 24V DC power input is being used, check battery is charged No power LED on control panel Check mains inlet fuse Ensure POWER switch is on Check input signals and condition of input connection leads Power LED is on but no other LEDs and no output Check MASTER, MIC, LINE IN or MEDIA controls are turned up... -
Page 11: Warranty
SERVICE Make sure the problem is not a user error, or caused by system devices that are connected to this unit. Information provided in the troubleshooting portion of this manual may help with this process. Once it is certain that the problem is related to the product contact your warranty provider.