Table of Contents
Advertisement
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Universal access] > [On] or [Off],
then press OK.
Hearing impaired access
Tip: To make sure that a hearing impaired
audio language is available, press
OPTIONS, then select [Audio language].
Languages with an ear icon support hearing
impaired audio.
To switch on hearing impaired audio and
subtitles
1. While you watch TV, press
2. Select [Universal access] >[Hearing
impaired].
3. Press a button to select an option:
Red button: Switch off hearing impaired
features.
Green button: Switch on hearing
impaired audio and subtitles.
4. Press
to exit.
Visually impaired access
Tip: To make sure that a visually impaired
audio language is available, press
OPTIONS, then select [Audio language].
Languages with an eye icon support visually
impaired audio.
To switch on visually impaired audio
1. While you watch TV, press
2. Select [Universal access].
3. Press the Green button to select [Visually
impaired].
4. Press a button to select an option:
Red button - [Off]: Switch off visually
impaired audio.
Yellow button - [Headphones]: Hear
visually impaired audio from
headphones only. (if applicable)
Green button - [Speakers]: Hear
visually impaired audio from speakers
only.
Blue button - [Speakers +
headphones]: Hear visually impaired
audio from speakers and headphones.
5. Press
to exit.
OPTIONS.
OPTIONS.
Note: If the EasyLink remote control is
switched on, you cannot select the Green
buttonor the Yellow button. To switch off
EasyLink, see Use more of your TV > Use
EasyLink > What you need (Page 28).
Change volume for visually impaired audio
1. In the [Universal access] menu, press the
Yellow button to select [Mixed volume].
2. Press the Navigation buttons to change
the volume, then press OK.
3. Press
to exit.
Audio feedback for the visually impaired
When you press a button on the remote
control or TV, you can set the TV to play a
beep.
1. In the [Universal access] menu, press the
Blue button to select [Key beep].
2. Press the Green button to turn on audio
feedback or press the Red button to turn it
off.
3. Press
to exit.
Other settings
TV demo
You can start a demo to find out more
about the features on this TV.
Note: Demos are not supported on MHEG
channels.
1. While you watch TV, press .
2. Select [Setup] > [Watch demos], then
press OK.
3. Select a demo, then press OK.
4. Press
to exit.
Location
To make sure that the correct TV settings
are applied, you can select where the TV is
used.
Shop or home mode
Select [Home] mode to access all TV
settings. In [Shop] mode, you can access only
limited settings.
1. While you watch TV, press .
2. Select [Setup] > [TV settings] >
[Preferences].
EN
37
Advertisement
Table of Contents
