Table of Contents
Advertisement
2 Use your TV
Watch TV
Switch TV on or off
Switch the TV on
Press the power switch on the TV.
If the TV is in standby, press
remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch on the TV from standby,
press CH +/- on the TV.
Switch TV to standby
Press
on the remote control.
The remote control sensor on the TV
switches to red.
Switch off the TV
Press
on the TV.
The TV switches off.
Note: Though your TV consumes very little
energy when it is in standby or switched off,
it does use some energy. If you are not going
to use the TV for an extended period of
time, disconnect the TV from the mains plug.
Automatic switch off
You can save energy with this TV's energy
efficiency settings. The settings are enabled
by default, so that if there is no user
interaction (such as pressing a remote
control button or a control on the front
panel) for four hours, the TV will
automatically switch to standby.
To disable automatic switch off
1. While you watch TV, press the Green
button on the remote control.
2. Select [Auto switch off], then press OK.
A confirmation message is displayed.
Adjust TV volume
Increase or decrease the TV volume
on the
Mute or unmute the TV volume
Adjust headphone volume
1. Press
[Sound].
2. Select [Headphones volume], then press
OK.
3. Press the Navigation buttons to adjust the
volume.
Press +/- on the remote control.
+/- on the side of the TV.
Press
Press
to mute the TV.
Press
again to restore the volume.
> [Setup] > [TV settings] >
EN
11
Advertisement
Table of Contents
