Table of Contents
Advertisement
Dolby Audio Processing
Set the advance settings.
• Volume Leveler: select On to adjust the volume
automatically.
• Dialogue Enhancer: select to get an improved sound
quality for speech program.
• Surround Virtualizer: select On to create a virtual
surround sound experience.
• Dolby Atmos: select On to enable Dolby Atmos,
which can add height dimension in sound. With
height dimension, sound can be precisely placed and
moved in three-dimensional space.
Reset to Default
Reset the current sound settings to default.
12.4
Power Settings
MENU > TV options > Power.
Set Sleep timer
Power > Sleep timer.
TV switches to standby mode automatically after a
preset time. You can stop the timer when the
notification pops to say that two minutes are left.
Set screen off to save energy consumption
Power > Picture off.
Select Picture off, the TV screen is turned off, to turn
the TV screen back on, press any key on the remote
control.
Set TV switch off timer
Power > Switch off timer.
Select Switch off timer, the TV switches off
automatically at a preset time to save energy. The
timer will not stop unless the setting is changed to
Off.
No Signal Auto Power Off
Power > No signal auto power off.
Press Navigation keys up or down to set the
value. Select Off to deactivate the automatic turn off.
* If you use the TV as a monitor or use a digital
receiver to watch TV (a Set-Top Box - STB) and you
do not use the remote control of the TV, you should
deactivate this automatic switch off, to set the value
to Off.
Set auto sleep timer
Power > Auto sleep.
The TV switches to standby mode automatically after
a preset time if the TV does not receive any command
from the remote control.
12.5
Advanced Options
Audio
Set the audio language
MENU > TV options > Advanced Options > Audio
Language.
The TV channels can broadcast audio with several
spoken languages for a program. You can set a
preferred audio language. If audio in one of these
languages is available, the TV will switch to this audio.
MTS
MENU > TV options > Advanced Options > MTS.
You can switch the sound of an analog channel to
Mono, SAP or Stereo.
* Note: MTS is for analog channel only.
12.6
Other settings
Device Preferences
Home > Settings > Device Preferences.
System Update
Update TV software from local update or from the
Internet.
About
To show the information about this TV or perform
Factory reset operation for the TV.
Date & Time
Adjust the date and time settings.
Timer
Set TV switch on or off timer.
32
Advertisement
Table of Contents
