Panasonic WV-BL730 Operating Instructions Manual page 22

2. Move the pointer to the character to be edited- by
pressing or Then move the cursor to the
character area and select a new character.
3. Press
El
to determine the CAMERA ID.
To erase all characters in the editing area
Move the cursor to RESET and press
El
.,AII charac¬
ters in the editing area disappear.
To determine the display position of the CAMERA
ID
1. Move the cursor to POSI, and press
El.
The dis¬
play shown below appears and the CAMERA ID
starts blinking.
Blinking
2. Move the CAMERA ID to the desired position by
pressing <□/ .
3. Press
El
to fix the position of the CAMERA ID.
The mode returns to the previous CAMERA ID
menu.
Notes:
• The CAMERA ID stops at the edges of the
monitor screen.
• The CAMERA ID moves faster if any of ^1/
is kept pressed for a second or
longer.
To return to the CAM SET UP menu
Move the cursor to RET and press
El
. The CAM SET
UP menu appears.
2. Light Control Setting (ALC/ELC)
You can select the mode for adjusting the lens iris.
The modes are as follows:
ALC: Select this mode when an auto iris lens (ALC
lens) is used with this camera.
ELC: Select this mode when a fixed iris lens or manual
iris lens is used with this camera.
(
-
^
** CAM SET UP •*
CAMERA ID
OFF n
ALC/ELC ALC n
SHUTTER OFF
AGC ON
SENS UP OFF
SXNC INT
MOTION DET
OFF n
LENS DRIVE DC
END SET UP ENABLE
S._*
-
20
-