Table of Contents
Advertisement
3.
RECORD
^ Insert a cassette.
Q
Use the I p+/~ j button to select the programme number
from which you wish to record, e.g.: 'P 01'.
0
Press the I
Record
♦!
button.
O
Use the I
stopb
] button to stop the recording.
^ If, whilst recording, you want to switch off the TV screen,
press the I standby^ button once.
To switch the TV screen on again, press the I
I
button.
Important notes for recoding
•
OTR:
If you do not want to record to the end of the
cassette, press the I
record
#1 button again. The display
shows at what time the recording will stop.
With the C3Z1 or the
L..
► I button you can change the
end time of the recording in 30 minute intervals^_
If you wish to cancel the end time, press the I
clear
|
button. This does not effect the recording.
•
Programme number
'El'
is provided for recording from
external sources (via the I
external
| scart socket).
•
Erase protection;
So that you don't accidentally delete
an important recording, you can remove the special tab
(erase protection) on the narrow side of the cassette
with a screwdriver or slide the special tab to the left.
Later, if you no longer want the cassette to be erase
protected, you can seal the gap again with adhesive
tape or slide the special tab to the right.
•
Auto-assembling:
You can use the auto-assembling func¬
tion to join individual recordings without any major
picture disturbance between the recordings.
Search for the correct position on the tape and then stop
the playback by pressing the I
stopb I button. 'PAUSE'
appears in the display.
Now start recording as usual by pressing the
I
RECORD
♦! button.
•
Long play: Before
recording, press the
I
menu I button.
Select and confirm the 'SPECIAL' line.
Select and confirm the 'TAPE SPEED' line.
Select the 'LP' (=LongPlav) recording speed and stop by
pressing the I
menu I
button.
During playback the TV Combi will automatically select
the correct playback speed.
Programme a recording
The set needs the following information for every pro¬
grammed recording:
* the date on which the recording is to be made
* the programme number for the TV channel
* the start and end time of the recording
*VPS/PDCon or off
The set stores all the information mentioned above in what is
known as a TIMER block. It can store 6 TIMER blocks for up
to one month in advance.
'VPS' (Video Programming System)/ 'PDC'
(Programme Delivery Control)
With 'VPS/PDC', the TV station controls the start and the
duration of a programmed recording. This means that the
video recorder switches itself on and off at the right time
even if a TV programme you have programmed begins earliei
or finishes later than expected.
Usually the start time is the same as the 'VPS/PDC' time. If,
however, a different'VPS/PDC' time is given, e.g.: '20.15
(VPS/PDC 20.14)', you have to enter '20.14' (the VpS/PDC'
time) exactly to the minute.
If you are not using 'VPS/PDC', the 'VPS/PDC' indication must
be off.
6
Advertisement
Table of Contents
