Kobalt TC 41SS11 Manual page 6

OPERATING INSTRUCTIONS
DRAWER REMOVAL
Pull drawer out until fully extended.
Step 1
Push down on right-hand side to release lever.
Step 2
Pull up on left-hand side, release lever.
Holding both levers, pull the drawer outward until
the drawer releases from the drawer slide.
DRAWER REPLACEMENT
Extend the drawer slides from the tool chest.
Insert the rail on each side of the drawer into the slots in the drawer slides, being careful that the drawer
rail and slide stay aligned while retracting slide! Do not force them!
Once inserted, completely close the drawer to set the slides in their regular operating positions.
1
2
6