Advertisement
@ When
the PRESET
A/B switch is pressed, the other
indicator that the currently-flashing indicator lights (A
— B, or
B > A). When
the numeric key is pressed, the
figure of the preset channel changes to that pressed.
@ |f you found entry mistake at this time. press the CLEAR
key: the display returns to the status before the PRESET
A/B switch was
pressed.
9. End of timer setup
Press the ENTER
key.
OFF TIME AUTO
me Ee
ty eo
ON TIME
PROGRAM
wo
mmm
GeHYSs
@ When the preset channel number has been entered,
press the ENTER
key.
The
preset
channel
and
PROGRAM
indicators
light
continuously,
indicating the end of timer setup. The
above display continues for approx. 5 seconds, and the
display returns to the initial status.
ie)
@L
ian
Note:
1. Ifthe PROGRAM
1 key ispressed during timer setup operation,
the timer setup mode
is canceled and the display returns to
the initial status.
2. When the station name display is applied, it is possible to select
preset channels 1 to 6 for both A and B.
Using the program timer
Both timer
Both timer
tion mode
tion mode
1. Press the POWER
switch
so that the unit is in the
standby mode.
2. Press the EXECUTE
1 = 2 key to select the program
timer to be used.
To use program timer 1 or 2, press the EXECUTE
1 =
2 key so that the PROGRAM 1 or 2. indicator light.
3. When the preset ON TIME is reached, the program timer
turns ON and the selected preset station is received.
4. When the preset OFF TIME is reached, the program
timer turns OFF.
To cancel the program
timer
Press the EXECUTE
1 == 2 key so that the PROGRAM
1
_and/or 2 indicator goes off.
To check the contents of timer program
1. Press the PROGRAM
1 or 2 key in which the program
to be checked
is input. The contents of the selected
program is displayed for 5 seconds.
2. Then the display before the key is pressed resumes.
Even in the STAND
BY mode
(when only the time is
displayed), pressing PROGRAM 1 or 2 key will display
the program
contents
for 5 seconds,
then the time
display will resume.
Setting the timer is possible only when
the POWER
switch is turned ON. When the POWER is OFF, only the
program contents can be checked.
14°
kT-87 (k)
Notes:
1. The timer program functions only when the PROGRAM
or
indicator lights.
2. When the PROGRAM
key is pressed or the POWER
switch is
pressed ON/OFF
during the timer is activated, the program
timer will not function correctly.
3. Be sure not to overlap the times when setting the.programs
1 and 2. (Refer to the example in the figure on the right.)
+
When both 1 and 2 programs are input, the program 2 has a
priority.
+
When
the ON-time
for the program
1 reaches
during the
program 2 is activated, the program
1 does not function.
+
When
the ON-time
for the program
2 reaches
during the
program
1 is activated, the program 2 begins functioning.
4. When functioning both program 1 and 2 sequentially, be sure
to leave 1 minute between the OFF-time of the first program
and the ON-time of the second program.
Example: When receiving 90.00 MHz FM broadcast for one
hour from 8 o'clock and 954 kHz AM broadcast for
one hour from
9 o'clock, set the ON-time for the
program.
1 to 8:00 and the OFF-time to 8:59, and
set the ON-time for the program 2 to 9:00 and the
OFF-time to 9:59.
5. When the timer function is activated. The same operation will
be performed on the same times every day. When the timer
Operation is not required, release the timer function according
to "To Deactivate the Timer Function".
6. On listening to the tuner with the timer function activated
(when the PROGRAM [1] or [2] indicator lights), when the set
time comes, the timer operation will function.
At this time. the receiving station will be changed to the station
which has been programmed for the timer. When recording the
broadcast from the tuner, be sure to confirm the programmed
contents of the timer.
7. The programmed contents of the timer cannot be canceled.
When
the timer is not used, be sure to release the. timer
function according to "To Deactivate the Timer Function".
Using the sleep timer
The sleep timer can be used to turn the power OFF after
up to 60 minutes. The power OFF time can be set with an
interval of 10 minutes.
1. Press the SLEEP key.
The SLEEP indicator lights and 60 is displayed.
2. To turn the power OFF within 60 minutes, press the -
SLEEP key.
The displayed number changes as follows.
POWER
POWER
Notes:
1. The sleep timer has priority over the program timer.
2. When the remaining time or the SLEEP TIMER
is displayed,
pressing any of the preset channel key, TUNING/CHARACTER
key, band select switch, etc. will display the frequency, then
5 seconds later, the remaining time display resumes.
3. When the remaining time is within 10 minutes, pressing the |
SLEEP key will turn the power OFF.
4. To release the SLEEP timer, press the POWER
switch to turn
the power OFF.
5. When the time is not set, the SLEEP timer is not displayed.
Advertisement
