Advertisement
2. Press the ADJUST
key
The hour display: of the left starts flashing.
keys as follows.
IB SE
proceed the above steps again.
|
°
f ?
(bio
Su
4. Press the ENTER
key
illuminates.
AM 9:05
Input in the order of
0-9-0-5
PM 4:50
Input in the order of
1-6-5-0
The time display illuminates.
When the ENTER
key is pressed, the clock starts.
Press the ENTER key according to the time signal of the
radio or telephone service.
Note: ——————____________—
When
the time display flashes, this indicates the power failure
occurred. At that time, reset the current time.
M@ Listening to broadcasts
Auto tuning
1. Press the POWER
switch.
2. Set the input mode of the amplifier to tuner.
6. Adjust the volume control of the amplifier.
Manual tuning
1. Press the POWER
switch.
2. Set the input mode of the amplifier to tuner.
6. Adjust the volume control of the amplifier.
Direct station tuning
1. Press the DISPLAY key to set the display window to the
frequency mode.
10 | KT-87.{k)
"2. Press the ENTER key on.
2. Select the desired band with the band select switches
(AM/FM).
3. While the frequency indicator is displayed, press the
DIRECT key.
4. Input the number of the frequency with the numeric
keys.
:
5. When
the input frequency is within the range of the
band, the station of the input frequency is received
immediately after the final column is input.
If the input frequency is out of-the range of the band.
the frequency indicator flashes for 5 seconds, then the
display mode before pressing the DIRECT key resumes.
6. During
inputting
the frequency,
when
the incorrect
numeric key is pressed by mistake and is noticed, press
the CLEAR key to return to the standby mode for the
first column input.
@ Preset memory
With the station name displayed, a total of 12 stations can
be preset, and with the station name not displayed, a total
of 20 stations can be preset for AM
or FM broadcast.
(Select the number of preset stations with the STATION
NAME AND
PRESET switch located on the rear panel of
the tuner.)
How to preset
1. Press
the
DISPLAY
ey to set the display to the
frequency display mode.
2. Press the AM or FM band select switch.
3. Receive the desired station to be memorized with the
TUNING/CHARACTER
key or DIRECT tuning function.
At this time, input the station name if required, referring
to "Station Name Indication" on page 11. (This opera-
tion is possible after memorizing the frequency.)
4. Press the ENTER key.
"MEMORY"
displays in the display window.
5. Select the A or B preset group with the PRESET A/B
switch.
When
this is not done,
the preset group: which
is
currently indicated 'is selected.
6. Within 5 seconds, press any'of 1 to 6 preset channel
keys (when the station name is displayed) or 1 to 0 keys
(when the station name is not displayed).
The MEMORY indicator in the display window goes off
and the preset indicator will light.
In the same
way,
preset
the other stations.
When
presetting
the station
into the "10"
preset channel,
press the "0" numeric key.
@ Example:
To memorized
90.0 MHz
into A-3 channel
(station name display mode)
1. Receive the desired station with the UP/DOWN
key or
DIRECT key.
PROGRAM
STATION
NAME
"MEMORY"
lights.
PROGRAM
AUTO
STEREO)
(TUNES
ae
Ey
B
a! |
Li
STATION
NAME
Advertisement
