Advertisement
7. Press the DIGIT key or press the CHARACTER
key.
PROGRAM
t
N
aes aie
ee
STATION
NAME
HM Operating timer
Setting the program timer
Timer setup procedure (The same procedure can be used
for both PROGRAM
1 and PROGRAM
2.)
The timer can
be set only when the POWER
switch has
been turned ON. When power is OFF, it is possible only
to check the program contents.
During setup, the station which has been received is not
changed, and the AUTO and band indications remain the
same.
@® Example
1: To seta Preset channel (B-2) in Timer 1 with
ON TIME 8:45 and OFF TIME 9:35
1. Current condition.
Reception
of FM 90.0:MHz stored in A-3..
PROGRAM
AUTO
Ort
rhs.
@ 2
a cn
af Let
Ld
+
STATION
NAME
2. Displaying PROGRAM
Press the PROGRAM 1 key.
ON TIME
PROGRAM
OFF TIME AUTO
myer
moan
eo
wu
a be
@ When the PROGRAM 1 key is pressed, the "1" indicator
flashes and the display shows the content of Program
'Timer 1.
The above
display continues for approx.
5 seconds.
During this period, press the ENTER key during to enter
the Timer Setup mode.
When the PROGRAM 1 key is pressed during this display
period, the previous returns to the previous status.
3. Starting setup
Press the ENTER key.
ON TIME
OFF TIME AUTO
@ When the ENTER
key is pressed, the "PROGRAM.
1"
indicator flashes to indicate that the Timer Setup mode.
At the same time, the first digit of the ON TIME display
starts to flash, indicating the entry standby for this digit.
If you find it unnecessary to change the current ON
TIME, just press the ENTER key; you. can then start the
entry of the OFF TIME.
4. Entry of ON TIME
Press numeric key "0".
ON TIME
PROGRAM
[JJ*
OFF TIME AUTO
wan
™
<mortdNnA
Uiluyfu
u
Uiulu
Vg
When
"0" is pressed, the first digit of the ON TIME
display goes
"O" which
is lit continuously,
and
the
second digit starts flashing.
.
When you made a mistake in entry, press the CLEA
key; the display returns to the stage of entry standby for
the first digit.
. Entry of ON TIME Using numeric keys
Enter "8", "4" then
"5".
Press these numeric
keys
within 15 seconds.
OFF TIME AUTO
Onan
@
f
wero
u
I
When four ON TIME digits have been entered, all the
ON TIME digits flashes to indicate the end of ON TIME
entry. If the setup is correct, press the ENTER key.
If the desired ON TIME is obtained by entering until the
third digit, press the ENTER key after the third digit.
To modify the ON TIME entered, press the CLEAR key:
the display returns to the stage or entry standby for the
first digit.
. Setting of ON TIME
Press the ENTER key.
Man
ON TIME
PROGRAM iy
OFF TIME AUTO
7
oc
mon
C845 ™ ee G
When
the ON TIME
entry is finished, the ON TIME
display lights continuously and the first digit of the OFF
TIME display starts to flash, indicating the entry standby
for this digit. If you found entry mistake at this time,
press the CLEAR key; the display returns to the stage
of entry standby for the first digit.
. Entry and setting of OFF TIME
Press numeric keys "0", '9", "3" then "5", and press
the ENTER key.
ON TIME
PROGRAM
OFF TIME AUTO
uo ts..
GSS
Bo.
When the ENTER key is pressed, the OFF TIME display
lights continuously,
indicating the end of OFF TIME
entry.
In its place, the preset channel
display starts
flashing to indicate the standby for preset channel entry.
If you found entry mistake at this time, press the CLEAR
key; the first press returns the display to the stage of
entry standby for the OFF TIME
first digit, and the
second press returns it to the stage of entry standby for
the ON TIME first digit again.
. Entry of preset channel
Select the preset channel group by pressing the PRESET
A/B switch, then press numeric channel key "2".
ON TIME
OFF TIME AUTO
Wwe
™
aD
u FF 72
eo
av
KT-87 (Kk)
13
Advertisement
