Advertisement
WARNINGS / INDICATIONS ON THE PRODUCT
LIST OF SYMBOLS USED IN THE PRODUCT AND IN THE CERTIFICATES
= compliance with applicable European Directives
0918 = Notification Body (TUV) identification code
= indicates a product compliant with installation in a hazardous area, for further Atex indications
check page 5
TS: -25°C ~ +66°C = Temperature range within which compliance and intrinsic safety is guaranteed
S.N.= Serial number
DN = size connections
P. Max = Maximum working pressure
Position = Working position (that can be horizontal and vertical)
YEAR = production year
It is possible to consult the technical data of the valve in the body of the product itself,
and in the packaging label.
ATTENTION! This device must be installed by a qualified technician according to the
regulations in force; if installed improperly, it could cause non-functioning such as
intentional or unjustified interruption of the gas supply service.
FLOW / ARROW = the seismic valve must be installed respecting the flow direction
indicated by the line with the arrow on the body, paying attention to the maximum
operating pressure.
Notice for recovery:
ATTENTION! Following activation of the device, it can only be reset after a qualified
technician has checked that there are no gas leaks.
P a g e .
12 | 15
Advertisement
