Advertisement
- Figure 1 shows how the product will be delivered (seismic valve and pin in the same packaging but separate).
- Figure 2 shows how the pin is screwed into the stem to proceed with the reset.
- Figure 3 shows how the reset is activated by pulling the pin screwed onto the reset stem.
- Figure 4 shows the direction to reposition the pin.
- Figure 5 demonstrates how the pin must be repositioned correctly in order to protect the device In this way, the reset
stem of the device is protected from deterioration of the rubber seals due to the deposit of dust, water and / or other
corrosive agents, prolonging the useful life of the device.
GENERAL INFORMATION INDICATED IN THE PRODUCT
The plate shows
• the identification data of the single valve (code, connections, year of production);
• the data relating to the parameters for use in an area classified for Atex purposes and their symbols;
• reports information about the installation position and the pressure and temperature limits;
• the CE marking and the identification number of the Notified Body;
• name or trademark identification of the manufacturer.
Example of label:
P a g e .
11 | 15
Advertisement
