Pitch Shifter - Boss RPS-10 Instructions Manual

[2] PITCH SHIFTER
The amount of the pitch shifting can be set within a
range of —1 to +1 octave.
The amount of the pitch shifting can be controlled
either with the knobs on the RPS-10 or externally by
the keyboard.
By connecting a chromatic tuner such as TU-12,
TU-12H, TU-100, the amount of the pitch shifting set
on the RPS-10 can be seen in the Display and the
Meter of the tuner.
When all the necessary connections are made, turn
the RPS-10 on.
* Turn the amplifier on in the end.
1. Pitch Shifting with the Control Knobs
@ Set the Range/Mode Knob @ to the Pitch Shift
Mode (A, B or INV).
Mode A:
Mode B:
INV Mode:
«EG: aa hm CH SHIFT
RANGE /MODE
(ma)
In this mode, the delay time of the effect
sound is short. Low frequency sound may
not be properly pitch shifted, therefore
may take on tremolo.
In this mode, delay time is longer than the
Mode A. Even a low frequency sound can
be accurately pitch shifted.
The tremolo is considerably reduced,
creating stable effect sounds.
In this mode, a unique sound can be ob-
tained by mixture of the tape recorder's
reverse playback like effect and the pitch
shifting effect.