Download Print this page

Advertisement

Quick Links

NOTICE
*Please make sure that you have all parts indicated and they are in good condi�on before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a so� surface to prevent scratching the finish during
assembly.
*This item may require periodic �ghtening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email customersupport@safavieh.com
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
*If any part is missing or damaged, do not a�empt to assemble the product.
*Es�mated Assembly Time: 60 minutes.
*Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
Always use felt pads under all ar�cles to prevent discolorra�on or so�tening of the lacquer.
Plas�c and rubber bases on items can discolor wood. Wipe up spills immediately and avoid
common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done
with a so� lint free co�on cloth dampened with water or furniture polish. On highly used surfaces
we recommend applying a quality paste wax shich should be used on a reguler basis to provide
addi�onal protec�on from scratches and spills. How o�en you apply the wax depends on how
much wear the furniture receives.
Part List
K
I
H
L
x 3
M
A
O
C
N
B
E
G
F
J
E
O
D
G
E
E
Model# CHS9600
Product Dimensions: 31"Wx19"Dx31"H
WARNING :
WEIGHT CAPACITY:
DRAWER LOAD CAPACITY 22 LBS
Warning : Do not stand on chest.
Warning : Do not over torque bolts.
53.9 LBS.

Advertisement

loading

Summary of Contents for Safavieh Furniture CHS9600

  • Page 1 *If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com PREPARATION Model# CHS9600 *Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
  • Page 2: Hardware List

    Hardware List HW1x23 HW2x8 HW3x15 HW4x32 HW5x6 HW6x8 Ø 6 x 30 mm Ø 6 x 35 mm Ø 15 mm Ø 12 mm Ø 8 x 30 mm M 7 x 50 mm HW7x2 HW8x24 HW9x18 HW10x18 HW11x18 HW12x12 M 4.5 x 12.5 mm M 6 x 10.5 mm M 3.5 x 13 mm...
  • Page 3 Part List & HW For Mul�-Box Items Piece Descrip�on Piece Descrip�on Top Board Cambolt Bo�om Board CamLock Big Side Board Le� CamLock Small Side Board Right Dowel Big Dowel Small Screw M 7 x 50 mm Bo�om Skirt 1 Allen Key Bo�om Skirt 2 Front Drawer Screw M 4.5 x 12.5 mm...
  • Page 4 PREPARATION *Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list. *If any part is missing or damaged, do not a�empt to assemble the product. *Es�mated Assembly Time: 60 minutes. *Tools Required for Assembly (included): Allen Key *If you are having difficulty, our friendly Customer Care team is always here to help.
  • Page 5 RM35A RM35A STEP5: Insert Cambolt (HW1) into Top Board. STEP6: Insert Dowel Big (HW4) into Side Board Le� (C), Insert Dowel Big (HW4) into Back Board (O) Side Board Right (D) and Support Board (N). Con�nue with securing part of the metal runner (HW RM35A ) into posi�on as the above image, using screw M6x10.5mm (HW9).
  • Page 6 STEP9: Insert Back Board (O) Secure with Camlock Big (HW2) and STEP10: Insert Bo�om Board (B), secure with Screw M7x50mm (HW6), �ghten it using screwdriver. �ghten screws using Allen Key (HW7). BC410 ± 2 mm ± 2 mm STEP11: Now let’s combine the bo�om skirt. Start with installing Corner Brace (HW BC410) into Bo�om Skirt 2 (G) using Screw M4.5x12.5mm (HW8).
  • Page 7 ± 2 mm STEP13: Combine components from step 12 with remaining STEP14: Insert Dowel Big (HW4) into Bo�om skirt 1 (F), using M4.5x12.5mm (HW8). assembled Bo�om skirt from previous step. Do not over�ght screw yet, leave around 2mm gap. STEP16: Place the Leg (E) on the center corner brace and STEP15: Bring the assembled bo�om skirt and insert into Bo�om Board insert the screw M6x25mm (HW20) with Allen Key (HW7) into the leg, of the chest drawer.Secure the bo�om skirt by inser�ng...
  • Page 8 WARNING LABEL Name Plate Position STEP17: Bring the chest drawer upright. Install Plat L (HW18), STEP18: Hold the sides of drawer, posi�on the wheel of rail at drawer Plat T(HW19) into the provided holes at front edges of the media stand. back and the wheel of rail at side boards, according to the image.
  • Page 9 TIPPING RESTRAINTS KIT INSTALLATION GUIDANCE Different wall materials require unique wall fasteners. The wall plugs (AA2) and screws (AA3) are designed for fixing to concrete walls only. Please consult your local hardware store to ensure you are using the correct hardware for your wall type. AA1 x 2 AA2 x 4 AA3 x 4...

This manual is also suitable for:

Chs9600aChs9600cChs9600dChs9600b