Download Print this page
Safavieh Furniture Silvanna COF9601 Manual

Safavieh Furniture Silvanna COF9601 Manual

Product dimensions: 43”wx23”dx16”h

Advertisement

Quick Links

NOTICE
*Please make sure that you have all parts indicated and they are in good condi�on before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a so� surface to prevent scratching the finish during
assembly.
*This item may require periodic �ghtening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email customersupport@safavieh.com
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
*If any part is missing or damaged, do not a�empt to assemble the product.
*Es�mated Assembly Time: 60 minutes.
*Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
Always use felt pads under all ar�cles to prevent discolorra�on or so�tening of the lacquer.
Plas�c and rubber bases on items can discolor wood. Wipe up spills immediately and avoid
common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done
with a so� lint free co�on cloth dampened with water or furniture polish. On highly used surfaces
we recommend applying a quality paste wax shich should be used on a reguler basis to provide
addi�onal protec�on from scratches and spills. How o�en you apply the wax depends on how
much wear the furniture receives.
Part List
C
G
F
A
G
D
E
D
B
G
LC18A1
LC18A1
G
F
C
Model# COF9601
Product Dimensions: 43"Wx23"Dx16"H
WARNING :
WEIGHT CAPACITY:
86 LBS.
SHELF LOAD CAPACITY : 22 LBS.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Silvanna COF9601 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Safavieh Furniture Silvanna COF9601

  • Page 1 NOTICE *Please make sure that you have all parts indicated and they are in good condi�on before you begin assembly of this item. Refer to part list and hardware list below for guidance. *This item should be assembled on a so� surface to prevent scratching the finish during assembly.
  • Page 2: Hardware List

    Hardware List HW1x8 HW2x8 HW3x8 HW4x20 HW5x8 HW6x8 Ø 5 x 20 mm Ø 6 x 35 mm Ø 15 mm Ø 15 mm Ø 8 x 30 mm M 7 x 50 mm HW7x2 HW8x2 HW9x2 HW10x4 HW11x16 HW12x8 M 4 x 22 mm M 4.5 x 12.5 mm M 8 x 39 mm...
  • Page 3 Part List & HW For Mul�-Box Items Piece Descrip�on Carton Call Piece Descrip�on Carton Call Top Board 1 of 1 Cambolt 1 of 1 1 of 1 1 of 1 Bo�om Board CamLock Side Board 1 of 1 1 of 1 Screw Cap Center Board 1 1 of 1...
  • Page 4 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list. If any part is missing or damaged, do not a�empt to assemble the product. Es�mated Assembly Time: 60 minutes. STEP1: Insert Cambolt (HW1)into Top Board (A).
  • Page 5 STEP5: A�ach Center Board 2 (E),into Top Board (A) . Step6: Insert Bo�om Board (B) and secure with Screw M7x50 (HW6), Insert Camlock (HW2) then �ghten using screwdriver. �ghten screws using Allen Key (HW7). Put Screw Cap (HW3) over the camlock. LC18A1 LC18A1 STEP7: Install Moun�ng Plate (PM2) and secure with...
  • Page 6 STEP9: Insert Dowel Small (HW5) into Support Frame (G). STEP10: Insert Pin Per Top (HW13) and Pin Sliding Bo�om (HW14) Insert Support Frame (G) and secure with Screw M8x39 (HW12) into Frame Door. �ghten screws into Frame Door (F). STEP12: Peel the back paper of Bumper (HW10) then place on both frame door, STEP11: Insert Handle (HW8) and Screw M4x22 mm (HW9) posi�on as shown in the figure.Hold the frame door with posi�on of into Frame Door.
  • Page 7 STEP13:Place your furniture on level floor. The legs come with adjustable leveller,adjust it as needed un�l your furniture sit steady on the floor.

This manual is also suitable for:

Silvanna cof9601a