HILLENBRAND INDUSTRY Hill-Rom Air-Shields RW82 Instructions Manual

Hili-Rom Air-Shields.
AHILLENBRAND INDUSTRY
INSTRUCTIONS REASON FOR CHANGE
INSERT THIS SHEET INTO THE MANUAL LOW PRESSURE GAS MODULE
DESCRIBED BELOW.
EQUIPMENT: Resuscitaire Radiant Warmer, Model RW82
MANUAL TITLE: Service Manual
MANUAL CAT. NO.: 82 990 07
ADDENDUM INFORMATION
MAKE THE FOLLOWING CHANGES WHEN A LOW PRESSURE GAS MODULE IS PRESENT IN THE
RESUSCITAIRE RADIANT WARMER:
TABLE 3.1A SPECIFICATIONS Page 3-3:
Change cylinder pressure from 2900 psi max (199.8 bar) to 3000 psi max (207 bar)
TABLE 3.1b SPECIFICATIONS Page 3-5:
Change cylinder pressure from 199.8 bar to 207 bar.
SECTION 3 RESERVE GAS SUPPLY PAGE 3-18. ADD THE FOWLING STATEMENT:
The regulator for United Kingdom and Canadian units is preset to 45 psi when the cylinder pressure is 1500
psi.
TABLE 6.10 RESUSCITAIRE RADIANT WARMER О PIPELINE (DISS/NIST) WITH O2 CYLINDER (PIN-
INDEX) GAS SUPPLY ASSEMBLY, PARTS LIST ADDS THE FOLLOWING:
Gas Supply, Oz Pipeline (NIST) O2 with Cylinder (Pin-Index) Low Pressure - Part Number 81501 94.
Add to Item 23 regulator, 45 psi W/press relief - Part number 81 501 77.
TABLE 6.12 RESUSCITAIRE RADIANT WARMER OyAIR PIPELINE (DISS/NIST) WITH Oy/AIR CYL-
INDER (PIN-INDEX) GAS SUPPLY ASSEMBLY, PARTS LIST ADDS THE FOLLOWING:
Gas Supply, Oo/Air Pipeline (NiST) with Cylinder (Pin-Index) Low Pressure - Part Number 81 501 95.
Add to Item 23 regulator, 45 psi W/press relief ~ Part number 81 501 77.
Cat. No. 82 990 07 - 7A3 Page 1 of 1 Printed in U.S.A., 9/00