Kenwood KR-300HT Instruction Manual page 8

FM DE-EMPHASIS / CHANNEL SPACE switch
(Except for U.S.A. and Canada)
The FM DE-EMPHASIS / CHANNEL SPACE switch on the rear panel 's
set to the correct setting that prevails in the area to which the unit is
shipped. However, if the FM DE-EMPHASIS / CHANNEL SPACE setting
is not matched to the area where the unit is to be used: for instance,
when you moved from area 1 to area 2 or vice versa, desired reception
of AM/FM broadcasts is not expected. in this case, change the FM DE-
EMPHASIS / CHANNEL SPACE setting in accordance with the area
corresponding to the table. The FM DE-EMPHASIS is switched over at
the same time.
eVVhen changing the setting of the FM DE-EMPHASIS / CHANNEL
SPACE switch, first disconnect the power cord of the amplifier, then
reset the channel space switch, connect the power cord again, and turn
the power on.
SPR EE ARH ae CCS Ete SEILER TOBE AAS BE IE TEC ORI E Ee
KA-300HT [En/K}
A SSEOIES RETRAIN A RATE AN CODD NOTA
CHANNEL '
SPACE
Pee CHANNEL FM DE-
SPACE freq. | EMPHASIS
U.S.A., Canada, }
1 Hawaii, South Aes eee 75 us
American countries '
FM: 50kHz
De--
EMPHasis 4 Ai FM 100kH2