Kenwood KR-300HT Instruction Manual page 20

Cal
KR-SOOHT (En/K])
Turn the power of the monitor TV ON.
Select the VIDEO1 ,VIDEQ2 or AV AUX input.
The input sources are switched in the followrng order:
i TUNER (frequency display)
2 PHONO
(3) VIDEO (TAPE1 or MD)}*!
4. CD
5 VIDEO2
'6 AV AUX
"VIDEQ1". "VIDEO2" o: "AV AUX" should be displayed.
17 T Telrad ot
yegge kul |
e Select the input to which a video deck 1s connected.
@*' : How to switch the display (12, 16;
Ej Play the video deck.
Recording of vide
video camera (playback only), LD player or DBS tuner.
FJ select the VIDEO2 or AV AUX input.
The input sources are switched in the following order:
'Ty TUNER (frequency display)
2: PHONO
@ VIDEO1 (TAPE1 or MD)*2
(4. CD
&: VIDEG2
6) AV AUX
"VIDEO2" or "AV AUX" should be displayed.
pe TN oT nad
I
yk pcwud |
e*2-: Select VIDEO).
@*2- For the display switching method: ~ 2. =e
Ej Play the source component.
Start recording on the recording video deck.
e Start recording with the video deck which is connected to the VIDEO 1
jacks.