Kenwood KR-300HT Instruction Manual page 23

KR-3O0HT [En/K]
How to calculate the | Front + | '1: Use the delay time calculation
proper delay time
pena
chettion the nant
& ae surround speakers 1s 2 Use the following
ace formula for calculation.
Surround
Delay time = Aum
20+3x (A-B) (Unit: ms)
speakers
What is delay time?
eNoise-like test tone moves across speakers at intervals of 1.5 seconds.
TEST L (Front speaker, left}
TESTC (Center speaker}
(Only when NORMAL or WIDE BAND is selected in step B)
TEST R (Front speaker, right)
TESTS {Surround speakers)
(Only when PRO LOGIC Is selected in step &)
TEST SUB (Sub-woofer)
(Only when SUB ON is selected in step BD).
rt wae. ere -
SURAOUND |
@ Ensure that "TEST L" is displayed. Test
tone will be output from each speaker.
© Adjust the volume teveis of the center |
speaker, surround speakers and sub- |
woofer with reference tothefront speaker |
(left & right) levels.
(1} While test tone is output from the
speaker(s} to be adjusted,
(2) Adjust the speaker level.
© After having adjusted all of the speaker
CONTROL keys.
{
| After this, the unit enters the condition
| for "G Adjust the delay time".
@ Ensure that the delay time adjustment
"How to calculate the proper delay time". (BB,
@ The delay time can be adjusted to 15, 20, 25 or 30 ms.
@ Select an integer value which is closest to the value obtained with
"How to calculate the proper delay time".
© Adjust the delay time.
ae To increase a
hoae ig ~ )
one LEVEL ~~~,
oe |
pillage
For the delay time setting of the DSP LOGIC and DSP
To decrease ~*~) as
aes,
ecre =
presence modes, referto
—-(2..
© Establish the setup. SURROUND
es | ae J fd
esol SETUP vil I Ld |
: i
(
ese
L a - a
aa ra
Ge, oe ss
! justment
Sy Scuhiog Delay time
This is the end of setup (the unit returns | Front speaker Surround speaker
to the condition before starting the setup " side side
Operations}.