Kenwood 107VR Instruction Manual page 26

The Sound Retrieval System is an epochal system which
produces a three-dimensional sound space by applying the
most suitable processing to the sound signal on the basis of
the human listening mechanism. This permits real depth
and sound location, considered as difficult to realize with
conventional 2-channel stereo (general stereo). A sufficient
effect can be obtained for any source (CD, tape, broadcasts,
etc.),
JO7VR [En]
Mee
Keys or controls to be used i this operation
Adjusting the tone.
© Turn the SRS 3D stereo ON.
SAS 3D
tC
© Abjust the effect strength (ievel}.
(1) "CENTER" or "SPACE" should be dis-
played.
i ! SOUND
es &
increasing the "CENTER" level en-
hances the feeling of depth around
the center.
Increasing the "SPACE" level makes
the sound expansion wider.
{2} Adjust the level.
— To -ncrease a
tne 'evel ay
; : LEVEL
Se SN
To decrease (Ty
oe the leve) Sem QAR
~ 4
Even if the sound is recorded while the SRS 3D stereo
effect is applied, the effect is not recorded together with
the source sound.
Each press of the key switches the modes as follows ~
1 SRS 3D 1s lit
[ wo. SRS 3D STEREO ON
2 SRS 3D is not lit
SRS 3D STEREO OFF
Lights
The level value vanes
@ Adjustment is possibie in the range from 1~7
ePlease set as desired according to the titles being played back etc