Safety Precautions - Kenwood 107VR Instruction Manual

107VA (En)
Units are designed for operation as follows.
that prevails in tne area to which the unitis sn:pped Before connecting 120v
the power cord to your AC outiet. make sure that the setting position
of this switch matches your line voltage It not, it must be set to your
vo'tage In accoraance with the following direction
Note
Ou warranty does not cover damage caused by excessive line voltage
due to -mproper setting of the AC voltage selector switch
Move switch lever to match your line voltage
with a small screwdriver or other pointed too!
Safety precautions
() CAUTION
A, Caution : Read this section carefully to ensure safe operation.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALI
FIED SERVICE PERSONNEL
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL. WITHIN AN EQUILATERAL TRIANGLE, IS IN-
TENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN
THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK TO PERSONS
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE APPLIANCE
Unpacking
Unpack tre unr caretuliy and make sure that al accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage
IF '1s Gamaged or fails to operate.
not'y your dealer immediately If your unit was shipped to you directly, notify the shipping company without delay
Orly the consignee [the person or company receving the unit! can file a claim against the carrier for shipping damage. We recommend that you retain the
ongna: cater and packing materiais for use should you transpo't or ship the unit in the future
Accessories
FM indoor antenna (1) AM toop antenna (1)
q
Loop antenna stand {1}
Batteries (R6/AA) (2)