Kenwood 107VR Instruction Manual page 21

107VA {En}
The surround modes allow you to enjoy the feeling of presence in music. Select the mode according to the source or components
played. For the connections of the surround and/or center speakers, refer to "Connection of speakers". = 8.
DOLBY PRO LOGIC surround mode
Video, DVD and LD software programs car-
rying the [[j(tauysisoun) mark contain re-
cording of the same Dolby Surround data as
In case center speaker is not used
Cemter speaker
those used in movie theaters. (8)
The DOLBY PRO LOGIC surround mode uses | WV. \ wv )
ence to movie theatres. Front speake Front speaker \
To use this mode, connect the surround
{and center) speakers. Surround speaker Surround speaker |
DOLBY 3 STEREO mode
Center speaker
If the left and right speakers are installed apart trom each other,
the center acoustic image (words, etc.) may vary depending on feria}
Ww
the listener's position. The DOLBY 3 STEREO mode provides an &
\
improved positioning of the center acoustic image regardless of
the listening position.
Use this mode when playing videotape, DVD or LD software
carrying the [X) [ocusy sumnouno] mark. Front speaker
To use this mode, connect the center speaker.
DSP LOGIC mode
Center speaker
OSP LOGIC lets you enjoy the atmosphere of a movie theater in
your listening room. By adding the reverberation aspects of a
movie theater to the sound from the original music source, you
can enjoy the soundscape of either a LARGE or SMALL movie |
theater. Be sure to connect surround and center speakers when \
Vv
using this mode.
ig
Front speaker
Surround speaker
DSP presence mode
This mode provides a live atmosphere to music sources. By Center speaker
adding the reverberation component of one of the three sound © wW |
fields of this mode, it allows to enjoy three kinds of sound fields ) =
(ARENA, JAZZ CLUB, STADIUM} with full of feeling of presence. —
The sound field can be selected according your tiking.
To use this mode, connect the surround speakers. . Front speaker
Surround speaker
Recommended speaker installation
Lis recommended that the surround speakers are installed straight to the left and right of the listening position or slightly betind,
at a height of about 1 meter higher than the listener's ears. Each surround speaker should be installed so that the longer sides are
horizontal
What is DSP?
The OSP stands for Digital Signal Processor. In the DSP presence and DSP LOGIC modes, the reverberation components (elements
of sound echoed tn various spaces} which determine the feeling of presence are created by digital processing by the DSP without
spoiling the sound quality of the original music source