Advertisement
CLD- D925
12. PANEL FACILITIES
FRONT PANEL
® POWER ON/OFF switch and STANDBY indicator
Press to turn the power on and off.
® Remote sensor
@ QUICK TURN button/indicator
@ DISPLAY OFF button/indicator
(©) HQ CIRCUIT button/indicator
© CD disc table
@) Disc table
Track/manual search (<4 <<, >> p>) buttons
§ DISPLAY WINDOW
@ Wt pause indicator
Lights when the player is in pause mode.
@ » play indicator
Lights during play. Blinks during search.
@ DISC SIDE A indicator
@ AC-3 RE indicator
@ DISC SIDE A/B buttons/indicator
@ PLAY button (>)
@ PAUSE button (11)
(2 STOP button (a)
(3 CD OPEN/CLOSE (4) button/indicator
(@ LD OPEN/CLOSE (4) button/indicator
(3 LANGUAGE button
(8 SYSTEM button
® Display window
®
0)
ct)
Lights when
a DOLBY SURROUND AC-3 disc is being
@
played back.
© RPT (repeat) indicator
Lights during repeat play.
© Track/chapter indicator
Indicates the track number or chapter number.
@) TOTAL indicator
indicates the TOTAL TIME (total play time).
PGM (program) indicator
Lights during program play.
98
Time/mode indicator
Indicates the elapsed playing time, remaining playing
time, total time or mode.
DISC SIDE B indicator
1/L, 2/R indicator
Indicates the audio output channel.
LD/CD/CDV visual calendar
When a disc is loaded, all of the chapter/track numbers
recorded on the disc light up on the display. If the disc
contains more than 15 chapters/tracks, the — indicator
lights.
During program play, only the programmed chapter/track
numbers light. When a disc without a TOC section is
played, only the selection number being played lights.
Whena CDV discis loaded, the track numbers of the video
part light followed by the track numbers of the audio part.
After a chapter/track is finished playing, the corresponding
number goes out.
Advertisement
