Changing The Sound.41 - Aiwa XD-AX10 Operating Instructions Manual

Adjustments
Changing the Sound
\m
rm m
When playing a DVD recorded in multiple
audio formats (PCM, Dolby Digital, or DTS),
you can change the audio format. If the DVD
is recorded with multilingual tracks, you can
With CDs8 DATA CDs8 or VIDEO CDs, you
can select the sound from the right or left
channel and listen to the sound of the selected
channel through both the right and left
containing a song with the vocals on the right
channel, you can hear the instruments from
AUDIO
DISPLAY
1 Press AUDIO during playback.
The following display appears,
total number of available audio signals.
2
Press AUDIO repeatedly to select
the desired audio signal.
♦ When playing a DVD
Depending on the DVD, the choice of
language varies.
When 4 digits are displayed, they
indicate a language code. Refer to
"Language Code List" on page 60 to see
When the same language is displayed two
or more times, the DVD is recorded in
multiple audio formats.
♦ When playing a VIDEO CD, CD, or
DATA CD (MP3 audio)
The default setting is underlined.
• 2/R: The sound of the right channel
• When playing a Super VCD
The default setting is underlined.
• LSTEREO: The stereo sound of the
• 1:1/L: The sound of the left channel of
the audio track 1 (monaural)
• 1:2/R: The sound of the right channel of
the audio track 1 (monaural)
• 2:STEREO: The stereo sound of the
• 2:1/L: The sound of the left channel of
• 2:2/R: The sound of the right channel of
Checking the audio signal
format
\m
If you press DISPLAY repeatedly during
playback, the format of the current audio
signal (Dolby Digital, DTS, PCM, etc.)
appears as shown below.
Example:
Dolby Digital 5.1 ch
Rear (L/R)
Front (L/R) LFE (Low Frequency
+ Center Effect)
41