Table of Contents
Advertisement
u
Select peripherals
Press this key repeatedly to select
or
, according to where
EXT2, EXT3
FRONT
you connected your peripherals (see p. 22).
M
Mode selection
Press this key repeatedly to indicate the
peripheral equipment you want to operate
with the remote control.
TV
TV operation
Press this key to use the remote control
directly in the TV mode
b
Picture in Picture
Press the b key to switch PiP on or off.
How to operate PiP, see p. 19.
q
Picture format
Press this key repeatedly to switch to a
Wide Screen format.
A black bar appears at the top and the
bottom of the screen.
The TV has an automatic switching function via
eurocable. Video recorders or programmes
carrying special signals will automatically switch
the TV to the correct screen format if connected
Smart Keys
To select predefined picture and sound
Each time it is pressed, a different picture
setting is selected, corresponding with a
specific predefined setting of Contrast,
Colour, Sharpness and Dyn. Contrast.
Each time it is pressed, a different sound
setting is selected, corresponding with a
specific predefined setting of Treble, Bass
Personal refers to the personal preference
setting of picture and sound which you
have stored with Store PP in the Features
The smart picture and sound settings are set
to Manual until the personal adjustments
are stored and you switched off the TV
Use of the remote control
EXT1,
with a eurocable..
settings.
Smart Picture
Smart Sound
or Loudness.
menu, p. 13.
and on again.
TV
VCR 1
TUNER
u
VCR 2
TAPE
SAT
DCC
M
AMP
CD
B
TV
OK
ZOOM
π
π
+
+
V
P
-
-
¬
1
2
3
b
q
4
5
6
7
8
9
PICTURE
SMART
i
0
0
SOUND
b
æ
B
Standby
The set is switched off and the red indicator
(green in the case of
TV
NEX
acquisition) lights up.
In case of
TV
acquisition the TV is
NEX
IEW
switched to full standby after about 30 min.
and the red indicator lights up.
To switch the TV on again, press - P + or the
digit keys.
P
Programme selection
To browse through the TV channels activated
in the Favourite Programme menu. See p. 6.
V
Volume
The volume is adjusted. If you want to store
the volume adjustment in the memory, see
the Features menu, Store PP, p. 13 to store
the same volume adjustment for all the
stored TV channels.
¬
Mute key
Temporarily interrupt the sound or restore it.
0/9
Digit keys
To select a TV channel.
For a two digit programme number, enter the
second digit within 2 seconds.
0
Previous programme
The previously selected TV channel is
displayed.
i Screen information
Press for 5 seconds to activate/de-activate
extended or reduced display of TV channel
and programme information on the screen.
Press briefly to display information about the
selected TV channel and programme, the
sound reception, the selected DNR setting
and picture format and the remaining time set
with the sleeptimer.
info
IEW
9
Advertisement
Table of Contents
