Table of Contents
Advertisement
2
Installation
Installing the TV set
æ
Place your TV set on a solid, stable surface (please
ensure this is strong enough). Do not place anything
on the TV set which might damage it (plants or heat
sources). For ventilation allow a space of at least 5cm
around the TV set.
Connecting the aerial and the mains
Â
Insert the aerial plug into the socket
of the set.
Insert the mains plug into a wall socket (220-240 V/50 Hz).
Surround loudspeakers
ê
Connect the 2 Surround loudspeakers as illustrated
opposite.The loudspeakers should be located at
the rear or on either side of the listener (always
connect 2 loudspeakers).The positive wire (the one
with the black line) to the red loudspeaker connection,
the negative wire to the black loudspeaker connection.
Remote control
®
Insert the 2 LR03-type batteries (supplied) making sure
they are the right way around.
In an effort to help protect the environment the batteries
supplied with this television do not contain mercury or nickel
cadmium. If a means of recycling batteries is available, please
use this (if in doubt, contact your dealer).
Switching on
†
Press the on/off key to switch on the television.
A green indicator comes on and the screen lights up.
If the indicator is red, press the
the remote control.
When the remote control is being used the indicator flashes
orange.
M
at the rear
key on
Advertisement
Table of Contents
