The Remote Control Keys - Philips 24PW6005/58 Handbook

The remote control keys

key not used
Sleeptimer
To select the length of time
before the set automatically
switches to standby (from 0 to
240 minutes)
Select EXT sockets
Press several times to select
EXT1, EXT2 and on certain
models EXT3 and S-VHS2.
Mode selector (p. 13)
To activate the remote control
in TV,VCR (video recorder) or
DVD mode.
Smart sound controls
To access a series of settings:
VOICE, MUSIC,THEATRE and
return to PERSONAL
To display or exit from the menus
These 4 keys are used to move
within the menus or to have
direct access to the 16:9 formats
To adjust the sound level
To disable or enable the sound.
Teletext features (p. 9)
Sound mode
To switch from STEREO to
MONO or to choose between
Dual I and Dual II for
bilingual transmissions.
For TV sets fitted with NICAM
reception, depending on the
transmission, you can switch
from NICAM STEREO to
MONO or choose between
NICAM DUAL I, NICAM DUAL
II and MONO.
When the sound mode is switched
to MONO, the indication is
displayed in red.
Menu
Cursor
(p 10).
Volume
Mute
Contrast +
To activate / de-activate the
automatic contrast adjustment
system (the dark areas are made
darker whilst maintaining the
detail).
Standby
To set the TV to standby mode.
To switch the TV set on again,
press P or
key not used
Numerical keys
For direct access to programmes.
For a 2 digit programme number,
the 2 nd digit must be entered
before the dash disappears.
Smart picture controls
To access a series of settings:
RICH, NATURAL, SOFT,
MULTIMEDIA and return to
PERSONAL.
Incredible Surround
To activate / deactivate the
surround sound effect. In stereo,
this gives the impression that
the speakers are further apart.
In mono, a stereo spatial effect
is simulated.
Selecting TV programmes
To move up or down a
programme.The number, (the
name) and the sound mode are
displayed for a few seconds.
For some TV programmes the title of
the programme appears at the
bottom of the screen.
Screen information
To display / remove the programme
number, the name (if it exists), the
time, the sound mode and the time
remaining on the timer. Hold down
for 5 seconds to permanently
display the programme number on
the screen.The volume level and
the Smart control adjustments are
then displayed each time it used.
Previous programme
To access the previously viewed
programme.
16:9 formats (p. 10)
.
3