1 Important safety and environmental
instructions
The iron must be used and
•
rested on a flat, stable surface.
When the appliance is placed
•
on its base plate, ensure that
the surface beneath the plate is
level.
Keep your device in a vertical
•
position or place on the iron
dock when you are not using or
having a pause during ironing.
If the appliance is dropped or
•
leaks water or has other failures,
contact the authorised service.
Do not use the appliance until it
is repaired.
Only use the original parts or
•
parts recommended by the
manufacturer.
Before you start calc cleaning,-
•
make sure the calc box on the
backside of the steam iron sta-
tion is empty.
Do not dismantle the appliance.
•
Your mains power supply should
•
comply with the information
supplied on the rating plate of
the appliance.
30 / EN
The mains supply of the appli-
•
ance should be secured with a
16 A fuse minimum.
Use the appliance with a
•
grounded outlet.
Do not use the appliance with
•
an extension cable.
Do not pull the power cable
•
when unplugging the appliance.
If the power cable is damaged,
•
it should be repaired or replaced
by the dealer, service center, or
a specialised and authorised
service with similar qualifica-
tions.
Unplug the appliance before
•
cleaning.
Do not wrap the cable around
•
the appliance.
Do not touch the appliance or
•
its plug with damp or wet hands
when the appliance is plugged
in.
The soleplate and the steam
•
station surface may get over-
heated. Contact with hot sur-
faces may cause burns.
Steam Generator / User Manual