Related Manuals for RW RWHT20
Summary of Contents for RW RWHT20
- Page 1 INSTRUCTION MANUAL PLEASE RETAIN DO NOT USE APPLIANCE WITHOUT READING THIS FIRST THIS MANUAL COVERS RWHT20 CORDLESS HEDGE TRIMMER...
- Page 2 Fig. 1 1. Cutter rail 2. Hand guard 3. Steady grip with button switch 4. Handle with button switch 5. Battery charger 6. Battery pack 7. Cutter guard 8. 2x screws for hand guard 9. 2x screws for steady grip 10.
- Page 3 Fig. 7 Fig. 8 Fig. 6 Fig. 11 Fig. 10 Fig. 9 Fig. 12 Fig. 13 Fig. 15 Fig. 14 Fig. 15...
- Page 4 INTENDED USE This cordless hedge trimmer is designed for cutting garden hedges in home gardens. Use for any other purpose is considered improper use. The manufacturer and supplier are not responsible for any damage that results from improper use. The operator is solely responsible for assuming all risks in these situations.
- Page 5 • Keep a diligent eye on what you are cutting and also on the ground where you are moving around to prevent tripping over material you have removed. Take regular breaks and clear all debris before recom- mencing. • Do not use the tools in the presence of flammable materials such as gases liquids or dry dusty environ- ments, the operation of the trimmer creates sparks which could ignite these elements.
- Page 6 • Hand guard with 2 screws • Steady grip with 2 screws • Original operating instructions • Safety instructions PRODUCT SPECIFICATIONS Cutting length ......... 520 mm Tooth spacing ........... 15 mm Cutting thickness max......11 mm Cuts/min ............2200 Protection class ..........III Charging time ..........
- Page 7 5 Charging the battery (Fig. 9) 1. Take the battery pack out of the equipment. Do this by pressing the side push lock buttons. 2. Check that your mains voltage is the same as that marked on the rating plate of the battery charger. In- sert the power plug of the charger into the mains socket outlet.
- Page 8 • To obtain good cutting results, always make sure the blades are sharp. • Check that covers and guards are undamaged and correctly fitted. Carry out necessary maintenance or repairs before using. If the hedge cutter should happen to fail despite the care taken in manufacturing and testing, repair •...
Need help?
Do you have a question about the RWHT20 and is the answer not in the manual?
Questions and answers