Advertisement
XL-M504BK
XL-M505TN
— How to install batteries
For XL-M505TN, XL-M504BK only
4. Remove the rear cover of the
remote control unit by pressing
down and simultaneously pulling it
backwards.
2. Install batteries (AAA, RO3, UM-4)
Be sure batteries are installed with
correct polarity, (+) and (-).
Please notes:
Incorrect use of batteries can cause
corrosion or damage. Note the
flowin points to lengthen battery
life.
1. Install batteries observing the
correct polarity, (+) and (—).
2. Do not use new and old batteries
simultaneously.
;
3. Batteries with similar shapes may
have different voltage ratings. Be
sure to use the correct batteries.
4. Remove batteries from the remote
control unit if it will not be used
for a long period of time.
1-6(No.20221)
POYAADI LT EAIL/
WoWFIVET WS ell WEN
I/Remofe /ill
Control System
POYAADII 1 IRIS
WoUFIVET WS MeSd CEN
XL-M405TN/XL-M404BK/XL-M77BK
The COMPU LINK Remote Control
System is a system of convenience,
it utilises the COMPU
LINK-1/SYN-
CHRO terminals, located on the rear
panel.
.
_more important features:
Automatic Source Selection
Synchronized Recording
Synchronized
recording refers to the
process
in which
the cassette
deck
starts recording, synchronized with the
CD player-changer.
Synchronized recording is carried out as
follows:
4. Set
the
cassette
deck
to
the
REC/PAUSE
mode,
in accordance
with its instructions.
2. When you want programmed record-
ing, program the music to be select-
ed in any order, as required.
3. Press the CD player-changer [PLAY
' (p
)j| button. The cassette deck is
now set in record mode and automat-
ically synchronized
with
the
CD
player-changer for recording. Syn-
chronized
recording can now take
place.
Notes:
synchronized recording automatical-
iy halts when the CD player-changer
stops playing. ©
-
To deselect synchronized recording,
press the [STOP ( m )] button locat-
ed on the CD player-changer or the
cassette deck.
:
When
the
REC/PAUSE .mode
has
been set by pressing the [PAUSE
( H_ )] button after pressing the [REC
( © )Jand[PLAY(
> )] buttons have
been pressed simultaneously, syn-
chronized recording is no longer pos-
sible. For details, please refer to the
cassette deck instructions.
Abnormal operation will result if the
units power supply is interrupted
while in operation. When this occurs,
pressing the activation button once
more will restart the unit.
Please ensure that the SYNCHRO ter-
minals
located
on this and other
units are only connected using the
special
remote
cables
provided.
Please read the instructions for each
system component carefully.
The source unit is locked to the CD
. setting during synchronized record-
ing, so as to avoid any accidental halt
to recording or switching
over to
another component. When you wish
to switch another unit in, it is neces-
sary
to' first
deselect
the
syn-
chronized recording mode.
- Synchronized recording is only pos-
sible when using JVC products incor-
porating SYNCHRO connectors.
For further details, consult your JVC
dealer.
Only JVC cassette decks incorporat-
ing thé-synchronized recording fea-
ture can be used with this equipment
in synchronized recording mode.
Contact your JVC dealer for details.
Advertisement
