Aiwa XR-M55 Service Manual page 7

DISASSEMBLY INSTRUCTIONS (U, LH, HR, EZ, K)
(A) HOW TO REMOVE THE TOP CABINET
1. Remove 6 screws from both sides of the cabinet. 3. Open the CD tray to remove its tray panel.
2. Remove 5 screws from the rear.
3. Remove the top cabinet in the direction of arrows. * To open the CD tray, push the CAM, SLIDE inwards as
£ arrow (1) and pull it out from the other side as in arrow (2).
* Pull out the tray to remove its panel " * " positions marked
Top cabinet the hook at the bottom side of the tray panel.
* After removed, close back the tray.
Top view
CAM, SLIDE
(B) HOW TO REMOVE THE CD SECTION
1. Remove all the screws on the rear cabinet and remove the
rear cabinet in the direction of the arrow.
2. Remove 2 screws from the top of the HLDR, CD.
Tray, panel
Rear cabinet . | y