Kawai ES4 Owner's Manual page 13

Hide thumbs Also See for ES4:
Table of Contents

Advertisement

LIGHT
For those still developing finger strength. A louder volume is produced
even when playing with a soft touch. LIGHT 2 is lighter than LIGHT 1.
LIGHT 14
mca
HEAVY
i
Perfect for those with strong fingers.
Requires a heavier touch to
HEAVY 2
produce a loud volume.
HEAVY 2 is heavier than HEAVY 1.
rio
OER
Lif
7
A constant volume is produced regardless of how hard the keys are
OFF
struck. This setting is suitable for sounds that have a fixed dynamic
range such as Organ and Harpsichord.
(1) To change from the standard touch press the Touch button. The LED indicator of the Touch
button will be turned on to indicate that the piano is now using a different touch setting.
(2) Use the Value buttons to change the type of touch while the Touch button is held down.
(3) Press the Touch button again to get back to the standard touch setting.
NOTE:
Touch selection is global for all the preset tones. You cannot have an individual setting for each
tone. Once the power is turned off, the setting will be reset to the standard setting.
LIGHT and HEAVY do not represent the physical weight of the keys. These are settings that affect
the sensitivity of the keys, which determines the volume level in response to the key movement.
4. REGISTRATION
A Registration is a setup that remembers most of the panel settings, such as sound selections and
effect settings, so that you can recall them at the touch of a button. Seven Registrations can be
memorized and saved.
(1) To memorize the current panel settings, press and hold the Registration button. While holding
the Registration button, press any one of the sound buttons marked 1 through 7 to select a location
for your new Registration. Continue holding both the Registration button and the selected sound
button until you hear a beep. The beep sound indicates that your Registration has now been saved
to your selected location.
(2) To recall a registration, first press the Registration button and make sure its LED is lit. Then
press one of the Sound buttons marked 1 through 7 to select the desired registration.
ee cee

Advertisement

Table of Contents
loading

Table of Contents