Advertisement
ATTACH TO BARBECUE - 3000S, 3000E, 1100S & 1000E SERIES
Step 1
Attach the motor mounting bracket (D) to the left side of the
roasting hood.
Use the bracket which has two screws diagonally apart.
The cylindrical spacers are used to separate the bracket
from the hood.
D
Step 2
Then slide the motor onto the bracket. Note the cable is
towards the top.
Step 3
Fit the shaft onto the roasting hood.
First insert the pointed end into the motor.
On the other end of the shaft, the groove of the collar rests
directly onto the mounting bracket. You may need to loosen
the wing nut on the collar to reposition it if necessary.
ATTACH TO BARBECUE - 3000S, 3000E, 1100S & 1000E SERIES
9
Advertisement
