Beef Eater ROTISSERIE Assembly And Operating Instructions Manual page 7

ATTACH TO BARBECUE - 1600 & 2000 SERIES
Step 1
First, attach the motor mounting bracket (C) to the left side
of the roasting hood.
Use the bracket which has one screw hole only. The bracket
is secured to the barbecue with a single nut and screw. The
dome shaped bump in the bracket presses into the barbecue
body and prevents the bracket from rotating.
C
Step 2
Then slide the motor onto the bracket. Note the cable is
towards the top.
Step 3
Fit the shaft onto the roasting hood.
First insert the pointed end into the motor.
On the other end of the shaft, the groove of the collar rests
directly onto the mounting bracket. You may need to loosen
the wing nut on the collar to reposition it if necessary.
ATTACH TO BARBECUE - 1600 & 2000 SERIES
7