Advertisement
• To enjoy calls, music and audio output from your device to the TWS earphones, make
sure that the media connection for both calls and media files is activated in the
Bluetooth menu.
Using the Multi-Function Button (MFB)
Function
Play/Pause
Previous song
Next Song
Volume +
Volume -
Answer call
End call
Reject call
Voice assistant
ANC on/of
Resetting the Earphones
• Open the lid on the charging case.
• Long press the reset button at bottom of the charging case for 5 seconds.
• The green indicator next to button blinks 3 times, then close the case lid and open
again. The earphones will reset.
Charging the Earphones
Place the earphones in the charging case and close the lid, a red indicator will turn on inside
each earphone when charging. The light will turn off when the earphones are fully charged.
Charging the Battery Case
• Plug the USB-C charging cable into the USB-C port in the charging case. Connect the
other end of the charging cable to a DC5V/1A power source (phone charger).
• The indicators on the bottom of charging case will be solid red while charging. When
charging is complete the indicators will turn off.
Right earphone (L)
Touch once
Touch twice
-
-
Touch and hold
Touch once
Touch once
Touch and hold for 3
seconds
-
Touch three times
Right earphone (R)
Touch once
-
Touch twice
Touch and hold
-
Touch once
Touch once
Touch and hold for 3
seconds
Touch three times
-
Advertisement
