Remove both earbuds from the charging case: they enter pairing mode within approximately 10 seconds with an audio tone and “Pairing” prompt. Activate Bluetooth on your device, search for devices and select T3. The earbuds will give a “Connected” prompt after successful connection.
Page 3
Charging the Case Connect an adapter with 5V output with a type C charge cable. Case LED Status Indicators Charging Flashing blue Full charge Steady blue light Notes: The earbuds will turn off automatically after 5 minutes if there is no connection to another device.
SPECIFICATIONS Earbud Size 23.4 x 18.5 x 21mm (one earbud) Weight 6.3g (one earbud) Earbud charging port Magnetic type Earbud charging current 80mA Earbud charging time 2 hours Working voltage 3.3V~4.2V Standby time Approx. 160 hours Operation time Music Time: 11 hours | Talk Time: 11 hours Operation time w.
Page 5
Speaker Φ 9mm Speaker specifications/mode Impedance 16ohm/type Frequency (Hz) 20Hz ~ 20KHz Sensitivity 93±3dB Input power 2mW ( normal), 5mW ( maximum) Microphone MIC sensitivity -42±3dB 130dB Charging Case Size 23.4 x 18.5 x 21mm Weight 44.3g Charging port Micro USB Battery Li-polymer Battery 1000mAh 3.7V/3.7Wh Input voltage...
Page 6
This is a Quick Start Guide, and we hope that this has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...