Advertisement

Roastilino

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Roastilino and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fracino Roastilino

  • Page 1 Roastilino...
  • Page 2 Overview JUG CLAMPING LEVER HUSK DRAWER SAFETY MICRO SWITCH TOUCHPAD ON/OFF SWITCH LED DISPLAY TEMPERATURE CONTROL (IF FITTED) FUSE HOLDER FAN AIR INTAKE...
  • Page 3: Installation

    The Roastilino must be placed on a hard, flat non flammable surface. WARNING: The Roastilino must never be placed on a table cloth or similar surface. It is highly recommended that adequate extraction for smoke is provided, this can be achieved by means of a suitable extractor fan.
  • Page 4: Operation

    Turning on Operation Turning on 1. Turn on the main on/off switch 2. The LED display will read “ON” Operation 1. Release the jug clamp mechanism by turning the jug clamp handle to the left. 2. Pull the jug forward using the jug handle. 3.
  • Page 5 5. Holding the jug in one hand, slide it in to the top rails and push back until it will not go any further, ensuring that the bottom of the jug is in line with the with the fitting below, otherwise it will not lock correctly.
  • Page 6 Touch pad Programming Button functions Setting 3 Setting 1: Roasting time 3min - Lightest roast Setting 2 Setting 4 Setting 2: Roasting time 3min 30Sec Setting 3: Roasting time 4min Setting 4: Roasting time 4min 30Sec - Darkest roast Setting 1 Fan: Starts the fan, can be used to further cool the beans or to create an aesthetic appeal...
  • Page 7: Temperature Control

    Temperature Control If Fitted Setting Roasting Temperature If a temperature controller has been fitted, you can adjust the roasting temperature as follows: 1. Press the “SET” button on the temperature control unit 2. Within 4 seconds use the “UP” and “DOWN” arrows to select the required temperature.
  • Page 8 Weekly Cleaing 1. Apply food safe silicon grease/spray to the thread, available from Fracino. Remove the Jug, lock the clamp- ing lever to the right and put grease on the thread between the top of the mechanism and the small flat plate.
  • Page 9 2. Always treat the machine with respect, do not use if the machine has been dropped, vandalized or other wise damaged, if in doupt contact your supplier or Fracino Direct on 0121 328 5757 3. Do not allow unqualified personnel to tamper with your machine.

Table of Contents