Table of Contents
Advertisement
Remove the battery
compartment cover.
Install 3 fresh "AA"
batteries as shown
SETUP
SETUP
Battery Choice
&
Temperature Range
Extended periods of cold temperatures ( below
-4°F
/
-20°C
) can cause
alkaline batteries to function improperly. This will cause the outdoor
wireless sensor to stop transmitting readings. Use lithium batteries in
these low temperature conditions to ensure continued operation for
wireless sensors placed outdoors.
LITHIUM
tt t,
p
=Li•W4■
(70°C)
158°F
I
BATTERIES ._.,_ .. _ ..__
,Iii.Iii.
ALKALINE
etwiiH®
(7QOC)1ssoF1
BATTERIES
A/B/C Wireless Selection
To allow for more than one weather station and wireless sensor
network to be used in close rroximity, the display unit and the
wireless sensor have a smal switch fabeled
"A B
C" within the
battery compartments. This switch selects one of 3 wireless modes
to use, and both switches MUST be set in matching positions (either
A, B, or C) fore wireless communication to take place successfully.
Installing Batteries - Wireless Sensor
Remove the battery
i
■
NOTICE!
compartment cover.
Install 2 fresh "AA"
i
batteries as shown here.
A-8-C
BATTERIES MUST BE
SWITCH SELECTION
MUST MATCH
DISPLAY UNIT
INSTALLED FOR THE
SENSOR TO OPERATE
SWITCH SELECTION
2
Installing Batteries - Display Console
here.
NOTICE!
Tull
i
■
i
A-8-C
SWITCH SELECTION
MUST MATCH
WIRELESS SENSOR
SWITCH SELECTION
About the Self Setting lntelli-Time® Clock
Your new weather station is equipped with lntelli-Time® technology
which is pre-programmed with the correct time and date. lntelli-Time®
technology instructs the clock to set itself once batteries are installed.
All you need to do is select your Time Zone and Daylight Saving Time
preferences. The clock will automatically set itself and change
automatically for Daylight Saving Time.
WARNING:
THIS
PRODUCT CONTAINS A BUTTON-CELL BATTERY. IF SWALLOWED,
IT&
COULD CAUSE SEVERE INJURY OR DEATH IN
JUST
2 HOURS.
SEEK MEDICAL ATTENTION IMMIDIATELY IF INGESTED.
~
POISON
3
Advertisement
Table of Contents
