Draytek Vigor2915 Series Quick Start Manual page 13

5. On the next page as shown below, please select the WAN interface that you
use. Then click Next for next step.
WAN1 (Ethernet) and WAN2 (Ethernet) will bring up different configuration page.
Here we take WAN1 (Ethernet) as an example.
After choosing WAN1, please specify physical type. Then, click Next. On the next
page as shown below, please select the appropriate Internet access type
according to the information from your ISP. For example, you should select
PPPoE mode if the ISP provides you PPPoE interface.
P P P o E
P P P o E
1. Choose WAN1 as the WAN Interface and click the Next button. The following
page will be open for you to specify Internet Access Type.
8