MEE AUDIO X6 Plus User Manual

ENGLISH
PACKAGE CONTENTS PRODUCT OVERVIEW
WIRELESS SPORTS
IN-EAR HEADPHONES
X6 Plus Stereo Micro-USB
Bluetooth Wireless

charging

Sports In-Ear cable
Headphones
Plus
User 4 pairs of
remote
manual eartips
1. Microphone
2. Volume Up / Skip
Track Button (
3.
Multifunction
Button (
CHARGING

WEARING THE EARPHONES

Connect the charging cable to any powered STEP 1: SELECT AND INSTALL THE CORRECT EARTIPS
USB port and to the charging port located on
the headset's remote control. Charge time is The X6 Plus is an in-ear headphone and relies
approximately 2 hours. The status indicator on a tight seal between the eartips and your
light will stay red while charging and turn blue ear canals to deliver good bass response and
when fully charged. overall sound quality. Four sizes of eartips are
included to help you achieve the best fit. We
N o t e : F o r m a x i m u m s w e a t r e s i s t a n c e , recommend trying all of included eartips and
make sure that the USB port cover is closed selecting the ones that provide the best sound
completely after charging the headset. and comfort for your ears.
When the battery is low, the headset will say Choose eartips that:
"battery low" and a red light on the remote will • Allow the earphone to fit flush in your ear
flash periodically.
• Seal with your ear canal and reduce outside
noise when inserted
Apple ® devices such as the iPhone ® , iPad ® ,
• Provide the best bass response
and iPod touch ® will also display an on-screen
headset battery indicator while the X6 Plus is
connected.
Install eartips as shown. Make sure eartips are
battery indicator installed securely before use.
WEARING THE EARPHONES (CONT.) WEARING THE EARPHONES (CONT.)
STEP 2: INSERT INTO EARS CORRECT FIT
The X6 Plus earphones feature an over-the-ear T h e e a r p h o n e s i t s
design with Flex-wire earhooks. flush in the ear and the
cable is secure behind
To put on the X6 Plus, first identify the right and the ear.
left earpieces as indicated by the "R" and "L"
markings. They are not interchangeable. When worn correctly,
the earphones will
reduce outside
noise and
deliver good bass impact.
If you do not get much bass or hear tinny
sound with excessive treble presence, re-
adjust the fit of the earphones in your ears
and/or try a different size of eartips.
Place the cable behind your neck, route Note: If you must remove and reinsert the
the earhooks around your ears, and put the earphones while working out, avoid getting
earpieces in your ears. Adjust each earpiece sweat in the nozzle as this may lead to a
until it fits flush in the ear and the eartip seals temporary reduction/loss of sound.
in the ear canal.
(OPTIONAL) IMPROVING PHONE CALL PERFORMANCE
For best microphone
performance during
phone calls, the X6 Plus
can be worn with the
wire in the front to improve
microphone positioning.
Orient the microphone
towards your mouth to
ensure the clearest and
loudest voice pickup.

BLUETOOTH PAIRING

CONNECTING TO PAIRED DEVICES

Your headset must be paired to a Bluetooth W h e n p o w e r e d o n , t h e X 6 P l u s w i l l
device before it can be used. It is only automatically connect with the most recently
necessary to pair your headset once with each
paired and/or connected Bluetooth device
device.
that is powered on and within range. If the
headset does not connect automatically, open
Make sure the X6 Plus is turned off and within
the Bluetooth menu on your device and select
3 feet (1 meter) of your device. Put the headset
"MEE audio X6 Plus" from the Bluetooth device
in pairing mode by holding the Multifunction
list.
button for about 4 seconds until the status
indicator light begins to flash red and blue in
an alternating pattern and the headphone says
"Pairing".
CONNECTING TO MORE THAN ONE
Phones and tablets
O p e n t h e S e t t i n g s m e n u a n d s e l e c t
DEVICE (MULTIPOINT)
Bluetooth. If Bluetooth is not on, turn it on.
Select "Search for Devices" or "Refresh" if
your phone or tablet does not automatically
M u l t i p o i n t i s a f e a t u r e t h a t a l l o w s t w o
search for new devices.
Bluetooth devices to be connected to the X6
Plus simultaneously. Both devices will need
Other devices
to be paired before multipoint can be used by
Visit www.MEEaudio.com/Bluetooth for
following the pairing procedure described in
pairing & setup information.
the BLUETOOTH PAIRING section for each
device. Once paired with both devices, power
Wait until you see "MEE audio X6 Plus" on the
on the X6 Plus on and wait until it connects to
screen of your device. Select it and follow any
the last paired device. Then, select "MEE audio
further prompts to pair. Use "0000" if a pin is
X6 Plus" from the Bluetooth menu of second
required. Once connected, the headset will say
device you wish to connect. The headset
"Connected" and the blue indicator light will
cannot be connected with more than two
flash two times every 3 seconds.
devices at a time.
If pairing fails, please refer to your
Note: Headset operating range and battery
device's user manual for further information.
Visit the Bluetooth Support Page at life may be reduced when maintaining two
MEEaudio.com/Bluetooth for instructional connections via Multipoint
p a i r i n g v i d e o s a n d t r o u b l e s h o o t i n g
information.

MULTIPOINT FUNCTIONALITY

FUNCTIONALITY & CONTROLS
To switch between the two devices, pause
audio playback on the active device and
start audio playback on the other connected
device. It takes several seconds for the audio
to switch.
Incoming calls will always take precedence
over media. When a call comes in, the X6 Plus
will automatically activate the device with
the incoming call. Some devices, such as
computers and standalone audio transmitters,
may not allow audio switching except when a
phone call occurs.
If you no longer wish to connect to multiple
devices, disable Bluetooth on the device
you do not want connected to the X6 Plus or
disconnect the "MEE audio X6 Plus" using the
Bluetooth menu of that device.
SAFETY & CARE
• To clean, remove the eartips and rinse them
under running water. Clean the earphones
using a cotton swab damp with a small amount
of rubbing alcohol. Allow the earphones and
eartips to dry completely before resuming use
• Use only the supplied Micro-USB charging
* You may need to bring your preferred media player
cables or compatible replacements from a
application up on the screen for media playback to start.
reputable manufacturer
** Not all devices support this functionality. For more
• Battery performance will be severely decreased
information, refer to the user manual for your device.
when stored in extreme temperatures: below
-10°C/14°F or above 50°C/122°F, including direct
sunlight
• The lifetime of the battery will be significantly
WARNING
reduced if your headset is not charged for a long
time. It is recommended to charge your headset
at least once a month.
Using headphones at high volumes for extended
• There are no user replaceable/reparable parts
periods of time will result in permanent hearing
in the headset. Disassembling it will void your
damage. It is advised you keep volume levels
warranty.
moderate to low at all times for your safety. Turn
• If the device comes in contact with liquids,
the volume all the way down after connecting your
quickly wipe away. If submersed in water, do not
earphones, then gradually increase the volume until
turn the device on until completely dried. Note:
you reach a comfortable listening level. Do not use
liquid submersion voids the warranty.
while driving a car, cycling, operating machinery,
• Do not use around flammable gasses as fire
or performing other activities that require hearing
may occur
surrounding sounds.
• Keep the device and packaging out of reach of
children

TROUBLESHOOTING

Visit the Bluetooth Support Page at
MEEaudio.com/Bluetooth for troubleshooting

FACTORY RESET

procedures. For any additional questions, visit
MEEaudio.com/Support or email
A factory reset will clear all paired devices
support@MEEaudio.com
from memory. To perform a factory reset, put
the headset in pairing mode as described in
WARRANTY
the BLUETOOTH PAIRING section, then press
and hold the Volume up and Volume down
buttons at the same time for 2 seconds. The
T h i s p r o d u c t i s c o v e r e d b y a 1 - y e a r
headset will produce three tones and the blue
manufacturer warranty when purchased from
indicator light will flash to indicate the memory
an authorized retailer. For more information,
has been cleared. The headset will need to be contact your local MEE audio dealer or visit
paired with a Bluetooth device before use. MEEaudio.com/Support
Have a question?
Email support@MEEaudio.com
The Bluetooth ® word mark and logos are registered trademarks owned by MEE audio and its logo are registered trademarks of S2E, Inc.
Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license. All rights reserved.
Other trademarks and trade names are those of their respective owners.
iPhone ® , iPad
Plus
1.
5.
2.
3.
6.
4.
4. Volume Down / Previous
Track Button ( )
5.
) Status Indicator Light
6.
Micro-USB
) Charging Port

VOLUME UP / SKIP TRACK BUTTON

[TAP] - Increase volume
[HOLD 1 sec] - Next track

POWER / MULTIFUNCTION BUTTON

[HOLD 3 sec] - Power on / off
[TAP] - Play / pause
(during media playback*)
[TAP] - Answer Incoming Call
[HOLD 2 sec] - Reject Incoming Call
[TAP] - End call (during phone call)
[HOLD 2 sec] - Activate Siri / voice
command / voice dialing**
[DOUBLE TAP] - Redial**

VOLUME DOWN/PREVIOUS TRACK BUTTON

[TAP] - Decrease volume
[HOLD 1 sec] - Previous track
[HOLD 2 sec] - Mute/unmute microphone
(during phone call)
® , and iPod touch ® are registered trademarks of Apple Inc.