Aiwa DX-D91 Service Manual page 3

PROTECTION OF EYES FROM LASER BEAM
This set employs laser. Therefore, be sure to
follow carefully the instructions below when
servicing,
WARNING! !
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT
WITH THE EYE TOO CLOSELY. IN CASE IT 1S NECESSARY
TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE
FROM A DISTANCE OF MORE THAN 30cm FROM THE SURFACE
OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION
Use of controls or adjustments or performance of proce-
dures other than those specified herein may result in haz-
ardous radiation exposure.
ATTENTION
L'utilisation de commandes, réglages ou procédures autres
que ceux spécifiés peut entrainer une dangereuse exposi-
tion aux radiations,
"Varoitus! Suojakoteloa ei saa avata. Laite sisaltaa laser-
diodin, joka lahettaa nakymaténta silmille vaarallista las-
ersateilya."
DISASSEMBLY INSTRUCTIONS
|, "Tray' Remova!
1) Remove the " Cabinet, Steel",
2)@For AUTOMATIC operation
Press the OPEN/CLOSE button to eject the "Tray".
e@For MANUAL operation
Insert a flat-head screwdriver into the hole at the
bottom of the set and turn the cam in the direction
of the arrow to eject the "Tray". (See Figure-1)
3) Remove "MAIN C.B" and loosen 2 screws and pull out
the "Tray" toward you, (See Figure-2)
DURING SERVICING
This Compact Disc playeris classified as aCLASS 1 LASER
product.
The CLASS 1 LASER PRODUCT Iabelis located on the rear
exterior.
CLASS-1
LASER-PRODUCT
ADVARSEL!
Usynlig laserstraling ved Abning, nar
sikkerhedsaforydere er ude af funktion.
Undga udsaettelse for straling.
"Denna apparat innehaller laserkomponent som
avger laserstralning som éverskrider gransen fér
laserklass 1."
« e b
2, CD Mechanism Removal
1) Remove 4 screws ® and remove "MAIN C. B".
2) Loosen 2 screws ®, remove 3 screws © and remove "CD
Mechanism', (See Figure-2)
Main C.B
i) Mechanism
Pig, -2